Soudal Genius Gun Soudafoam Window and Door - 600ml 
ALM Code 7 Milled Lead - 180mm x 3m 
Oxyturbo Maxy Gas Refill 
Ronseal 5 Minute Multi-Purpose Smooth Finish Filler - 600ml 
Ronseal Stays White 2in1 Paint & Primer - Satin 750ml 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Antique Red (Box of 5) 
Everbuild Everflex 200 Contractors LMA Silicone - Transparent 295ml (Box of 25) 
Everbuild Forever White Silicone Sealant – 295ml (Box of 12) 
Code 5 Cast Lead - 150mm x 6m 
Soudal Pro 40P PU Wood Adhesive - 750g 
Code 8 Cast Lead - 510mm x 3m 
Soudal Butyrub Non-Setting Mastic - Black 300ml (Box of 12) 
Code 6 Cast Lead - 510mm x 3m 
Samac Aluminium Clout Nails - 55mm x 3.35mm (1kg) 
ALM Code 4 Milled Lead - 850mm x 6m 
Ronseal One Coat Stain Block - White 750ml 
Ronseal Super Flexible Smooth Finish Filler - 300ml 
Bond It No Crack Caulk - White 310ml 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Slate Grey (Box of 5) 
Uses
The Stick2 Superglue GP by Everbuild is ideal for perfectly fitting surfaces that need to be bonded, with its curing time of only 10-15 seconds. It offers small but effective gap-filling properties suitable for up to 0.1mm and is a convenient single-component adhesive. It's an environmentally friendly alternative glue, and this is due to its economical usage alongside its solvent-free composite. Surfaces that this product is excellent for bonding include;
- Plastics
- Metals
- PVCu
- EPDM
Preparation
Surfaces to be bonded must be cleaned, dry and free from contaminants that can hinder the adhesion, such as dirt, dust, oil, grease, etc. To avoid chilling glue lines, store surfaces in a warm environment before bonding, and when commencing the application, ensure there's a relative humidity of 50%+
Application
- Unscrew the cap of the product
- Squeeze the product to one surface only
- Press the surface and hold them together for at least 10 seconds, taking care with the aligning as the open time is short.
Limitations and Notes
- This product should be used in applications that are constantly immersed in water.
- Ensure the surfaces are degreased before bonding
- Ensure surfaces are close fitting as it doesn't bridge gaps
- Do not use on surfaces or products that are bitumen or tar-leaching
