Freeflow 65mm Square Down Pipe Clip Standard - White 
Code 5 Cast Lead - 760mm x 3m 
Everbuild KOS Black Fire Cement - 500g 
Code 6 Cast Lead - 600mm x 3m 
Everbuild 501 PVA - 5 Litre 
Bond It Contractors PVA - 25L White 
Bond It Multi-Purpose Powder Filler - White 1.5Kg 
Everbuild Maximum Torque - White 290ml (Box of 12) 
OB41 Electrical Contact Cleaner - 400ml 
OX Pro Chalk Refill, Red - 226g 
ALM Code 7 Milled Lead - 800mm x 6m 
Everbuild 701 Non-Slip Tile Adhesive – White 3.75kg 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
Sika Patio Seal – 5 Litre 
OX Trade Metric Tape Measure - 8m 
EVO-STIK Sticks Like All Weather Adhesive - Clear 290ml 
ALM Code 4 Milled Lead - 1000mm x 3m 
ALM Code 8 Milled Lead - 1000mm x 6m 
D4 Wood Adhesive – 1 Litre 
Lead Roofing Wood Core Roll (50mm x 2.4m) 
Soudal Handheld Gap Filler Expanding Foam - Champagne 750ml (Box of 12) 
Uses
The Stick2 Superglue GP by Everbuild is ideal for perfectly fitting surfaces that need to be bonded, with its curing time of only 10-15 seconds. It offers small but effective gap-filling properties suitable for up to 0.1mm and is a convenient single-component adhesive. It's an environmentally friendly alternative glue, and this is due to its economical usage alongside its solvent-free composite. Surfaces that this product is excellent for bonding include;
- Plastics
- Metals
- PVCu
- EPDM
Preparation
Surfaces to be bonded must be cleaned, dry and free from contaminants that can hinder the adhesion, such as dirt, dust, oil, grease, etc. To avoid chilling glue lines, store surfaces in a warm environment before bonding, and when commencing the application, ensure there's a relative humidity of 50%+
Application
- Unscrew the cap of the product
- Squeeze the product to one surface only
- Press the surface and hold them together for at least 10 seconds, taking care with the aligning as the open time is short.
Limitations and Notes
- This product should be used in applications that are constantly immersed in water.
- Ensure the surfaces are degreased before bonding
- Ensure surfaces are close fitting as it doesn't bridge gaps
- Do not use on surfaces or products that are bitumen or tar-leaching
