Everbuild 501 PVA - 1 Litre 
Code 5 Cast Lead - 800mm x 3m 
Bostik Flashband Self Adhesive Flashing Tape – Grey 3.75m x 75mm 
Bondit Monster Mesh Pink 50m x 1m - 160g/m2 
ALM Code 5 Milled Lead - 390mm x 6m 
ALM Code 6 Milled Lead Flashing - 1600mm x 6m 
Timco Classic Pozi Multi-Purpose Screws - Mixed Tray 
ALM Code 3 Milled Lead - 600mm x 6m 
Klober Single Pantile Vent - Brown KG9860-0247 (Box of 10) 
Ronseal One Coat Water-Based Tile Paint - White Gloss 750ml 
Soudal Roof & Gutter Sealant – Black 290ml 
Code 6 Cast Lead - 450mm x 3m 
Soudal Silicone Sealant Remover, Clear - 100ml 
Code 7 Cast Lead - 1600mm x 3m 
Bond It Monster Water Resistant Tape - 48mm x 11m (Black) 
Soudal Gap Filler Expanding Foam Genius Gun 300ml - Champagne (Box of 12) 
Ronseal Stays White 2in1 Paint & Primer - Matt 750ml 
ALM Code 4 Milled Lead - 914mm x 6m 
Ronseal One Coat Damp Seal - White 750ml 
Everbuild Multi-Purpose Wood Filler - 250ml Dark Oak 
Uses
The Everbuild Stick2 Industrial Superglue HV – Clear 50g offers fantastic adhesion to various surfaces, delivering an unbreakable bond that cures in just 1 minute of application. Stick2's unique formula enables a market-leading product which adheres to both porous and non-porous surfaces with ease. Surfaces that are ideal for application include;
- MDF
- Rubber
- Metals
- PVCu
- Plastics
Preparation
It's important to prepare the surface; otherwise, you'll not achieve optimal adhesion. This includes removing contaminants present, including dirt, dust, oil, grease, etc. Unsightly glue lines may occur; it's important to store the surface you're bonding in a warm environment prior to bonding, as this will prevent it.
Application
It's important to align the surfaces together correctly before applying once you've started. You have limited time to bring the surfaces together.
- Apply the adhesive to one of the surfaces.
- After applying, immediately bring the two surfaces and hold for 10 seconds.
Limitations
- Ensures surfaces are degreased prior to bonding
- Make sure surfaces are close fitting, and this adhesive will not bridge gaps
- Do not use this product in applications which involve constant water immersion
- Do not apply to bitumen or tar-leaching products.
