Bond It Mould Stop - Clear 1L 
Code 8 Cast Lead - 1000mm x 3m 
Siroflex Trade Strength Medium Viscosity Superglue - 20g 
Code 7 Cast Lead - 390mm x 3m 
Everbuild Jetcem Deep Rapid Repair Sand & Cement – 2kg 
Ronseal Diamond Hard Floor Varnish - Clear Matt 5L 
84 x Eridge Dry Fix Ridge System Black - 6M Kit 
Everbuild External Frame Sealant - White 290ml (Box of 12) 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Antique Red (Box of 5) 
ALM Code 3 Milled Lead - 1200mm x 3m 
ALM Code 6 Milled Lead Flashing - 1600mm x 6m 
ALM Code 7 Milled Lead - 600mm x 3m 
Code 6 Cast Lead - 510mm x 6m 
Code 4 Cast Lead - 600mm x 6m 
FloPlast Universal Hopper, Black – 65-68mm 
Everbuild 404 Fungicidal Wash – 5 Litre 
Timco Velocity Premium Multi-Use Screws - Mixed Tray 
OB1 Diamond Crystal Clear Universal Sealant & Adhesive 290ml 
Everbuild 502 Wood Adhesive – 1 Litre 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
ALM Code 5 Milled Lead - 210mm x 6m 
Soudal Fix ALL Flexi – Grey 290ml (Box of 12) 
Everbuild Bath & Kitchen Sealant - 200ml 
Ox Tools Waterproof Latex Gloves Size 9 Large 
Sika 1 Waterproofer – 5 Litre 
Uses
Stick2 Rapid Epoxy Syringe is an exceptionally strong bonding two-part system that cures to a strength that can be drilled, sanded or painted. This product offers what most other adhesives don't, a glue capable of bonding almost any surface to another. It can be used for bonding;
- Metals
- Glass
- Wood
- China
- Dry Concrete
- Fabrics
- Rubber
- Crystals
- Jewellery
- Precious Stones
- Various Hard Plastics
Preparation
Prepare the surface before applying, and remove any contaminants hindering the adhesion. This includes; dust, oil, grease, general dirt and similar impurities. You can roughen the surface with sandpaper, and this optimises adhesion.
Application
- Remove the cap from the top of the product and snap off the tab from the bottom of the nozzles.
- Use the plunger to extrude equal lengths of resin and hardener onto a clean surface and place the cap back onto the product.
- Mix thoroughly for 30 seconds to 1 minute using the stick provided.
- Once mixed, use it within 4 minutes, applying small quantities at a time and immediately bringing both surfaces together.
- Hold surfaces together firmly, and if needed, use clamps to support the curing process, which will take 10 minutes at 20°C
Limitations
- This product is unsuitable for repairing areas containing food or drink.
- Ensure you do not cross-contaminate the hardener with the resin, as it causes the tubes to cure inside.
