Everbuild Triple Action Wood Treatment – 5 Litre

Uses

The Triple Action Wood Treatment by Everbuild is the ultimate wood-treating product on the market. It is crafted to cater to both wood treatment and preservation in one can, using a low-odour solution based on micro-fine technology with added fungicides, algaecides and permethrin. This formula actively combats wood rot, decay, and kills fungi and wood-boring insects. The applications areas this product is typically applied include;

• Sheds and garages
• Fencing and farm buildings
• Roof beams and joists
• Garden furniture
• Floorboards
• Window frames and doors

Preparation

Prepare the application area by ensuring that it's clean and free from paint varnish, stain, grease, bark or other impurities. You can apply this product to a damp surface. Any decay present must be removed and replaced with a sound, treated timber.

Application

1. Shake well before use.
2. Apply by using either a brush, spray or dipping.
3. After the first coat has dried, you should apply a second,
4. It is important to pay attention and to soak the end grains thoroughly; for optimal protection, dip it for at least 3 minutes.

Limitations

• Do not dilute this product, as it is ready to use
• This should not be applied to surfaces that food is prepared on
• Avoid contact with bitumen, roofing felt or plastics
• External timbers must be overcoated to reduce environmental impact
• You should use coarse rather than fine mist generators
• This should only be used as specified, as a surface biocide and wood preservative.