Code 6 Cast Lead - 450mm x 6m 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
Klober Universal Tile Vent Grey KG9854 (Box of 10) 
Youngman Spacemaker Loft Ladder (30234000) 
Klober Single Pantile Vent - Antique Red KG9860-0116 (Box of 10) 
Everbuild Multi-Use Wonder Wipes Tub (100 Wipes) 
Ronseal Interior Varnish - Clear Satin 2.5L 
Ronseal Knot Block Primer & Undercoat - White 250ml 
Ronseal One Coat Water-Based Tile Paint - Black Satin 750ml 
FloPlast Downpipe Rainwater Diverter Kit RVS1 
ALM Code 4 Milled Lead - 360mm x 3m 
ALM Code 6 Milled Lead Flashing - 1200mm x 6m 
Left Hand Klober Contract Dry Verge Unit Brown 
Everbuild Showerproof Bathroom Silicone - Clear 280ml (Box of 12) 
Bond It Duct Tape - Silver 48mm x 45M 
OX Pro Harling Trowel - 165mm X 165mm 
OX Pro Brick Carrier 
Ox Tools Spectrum Superior Diamond Blade 115/22.23mm 
Bond It Barrier Tape Yellow and Black - 70mm x 500M 
Everbuild Lumberjack 5 Minute PU Wood Adhesive Gel – 310ml 
Everbuild Easi-Squeeze Flexible Decorators Filler - White 200ml (Box of 12) 
ALM Code 7 Milled Lead - 390mm x 6m 
OX Pro 4 In 1 Heavy Duty Staple Gun 
Uses
The Wet Rot Wood Hardener by Everbuild is the ultimate wet rot combating product, achieved through a unique selected resin composite which soaks deeply into the surface of the wood into the fibres, hardening it and providing a base for subsequent wood filling and restoration. Applications this product is typically applied in include;
- Strengthen and reinforce softwood and hardwood
- Repairing wood damaged by wet rot
Preparation
Before application, remove all decayed and crumbly wood until you're down to a solid base. Ensure that the wood is free from contaminants like dust and is reasonably dry, sound and clean.
Application
- Shake the product and decant solution into a suitable container
- Apply to the area by brush until it's completely saturated
- To achieve an enhanced effect, drill a hole into the wood and apply the wood hardener to it
- Allow drying and remove any excess hardener with a wire brush
- Once hard, you can fill it with a suitable wood filler and sand and then stain or paint the surface.
Limitations and Notes
- Avoid contact with metal, plastic, painted surfaces and glass
- Do not use this product as a surface treatment
- Any residual hardener on the surface must be removed before filling
