Everbuild Wood Stain - 2.5 Litre

Uses

Wood Stain Satin by Everbuild is an excellent wood staining product with a formula specially designed to offer rejuvenation, protection and a flawless finish. This product is ideally used on a surface that a smooth planed timber. It doesn't apply well to rough surfaces. The typical areas of applications for Everbuild Wood Stain Satin include;

Door Frames
Window Frames
Architectural timber
Conservatories
Cladding
Garden Furniture

Preparation

Ensure you properly prepare the surface before applying and remove dust, dirt and similar contaminants. Any rough areas or edges must be smoothed down to allow optimal application, and any varnish or paint present must be sanded and stripped away.

Application

Stir the product well before using it.
Using a brush, apply the wood stain following the wood grain to optimise the varnish's colour.
Apply 3 coats altogether, giving 4 hours between each coat. Before completing the final coat, lightly sand the surface, as this will provide a key for the final coat.
Always apply the stain to a wet edge, working systematically across the surface, keeping the wet edge moving together as much as possible. After applying to the area, the finished appearance will be improved by feather brushing over the entire area with an unloaded brush, taking care to follow the wood grain.

Limitations

The colour swatch label is an indication of the wood stain colour. Always test the colour in an inconspicuous area before completing the entire project.
Do not use it on wood floors or decking.
Protect from frost, do not apply below 10°C
In high ambient temperatures or direct sunlight, you may not be able to maintain a wet edge which could lead to a poor finish.
Ensure exterior wood/timber is treated with a non-repellent wood preservative before application, especially in areas subject to weathering.

Additional information

Colour	Mahogany, Teak, Antique Pine, Rosewood, Dark Oak, Natural Oak, Walnut
Product Type	Building Supplies, Wood Treatment
Storage Conditions	Store in cool dry conditions between + 5 and +25°C. Storage outside these conditions will dramatically reduce shelf life. PROTECT FROM FROST.
Viscosity	1500 – 2500cP @ 20°C (Brookfield RVT 4, 20 rpm)
pH-Value	Approx 7.5 – 9.0
Consumption	Coverage of up to 20 square metres per litre. Coverage will vary depending on the absorbency of the wood.

Technical Data Sheet

Safety Data Sheet

Colour

Mahogany, Teak, Antique Pine, Rosewood, Dark Oak, Natural Oak, Walnut

Product Type

Building Supplies, Wood Treatment

Storage Conditions

Store in cool dry conditions between + 5 and +25°C. Storage outside these conditions will dramatically reduce shelf life. PROTECT FROM FROST.

Viscosity

1500 – 2500cP @ 20°C (Brookfield RVT 4, 20 rpm)

pH-Value

Approx 7.5 – 9.0

Consumption

Coverage of up to 20 square metres per litre. Coverage will vary depending on the absorbency of the wood.

FREE Next Working Day Delivery on Orders over £10*

Everbuild Wood Stain - 2.5 Litre

Uses

Preparation

Application

Limitations

Additional information

Technical Data Sheet

Safety Data Sheet

Product Information

Technical Data Sheet

Safety Data Sheet

Related Products

Everbuild EB25 Ultimate Sealant & Adhesive – Grey 300ml (Box of 12)

Everbuild Everflex Heat Mate Sealant - Red 295ml

Ronseal Multi Purpose Wood Filler - 465g

Recommended products

Standard Brush 4-Inch

Permavent Easy Slate 600 – Box of 100

Cromapol Acrylic Roof Coating – 5kg

Get new offers to your inbox.