Code 6 Cast Lead - 390mm x 6m 
Bond It PVA & Adhesive Sealer - White 5L 
Code 7 Cast Lead - 150mm x 6m 
Timco Flat Wood Bit Set 
ALM Code 3 Milled Lead - 510mm x 3m 
Everbuild Black Jack 901 Black Bitumen Paint – 25 Litre 
Everbuild Wood Filler Hardener / Catalyst - 40g 
Bond It Mould Stop - Clear 1L 
Bond It 5 Minute PU Wood Gel - Translucent 300ml 
Ronseal 6 Year Anti Mould Paint - White 400ml Aerosol 
OX Pro Gauging Trowel - 7" / 180mm 
Everbuild Black Jack 902 Bitumen & Flashing Primer – 5 Litre 
OB1 Grip & Grab Waterproof Adhesive 
Easy-Trim Universal Dry Verge System Black (Pallet of 400) 
Cromar Black Bitumen Paint - 5 Litre 
Spax Magnetic Bit Holder - 1 Piece 
Everbuild Lumberjack 550 Floor Adhesive – 600ml (Box of 12) 
Ronseal Quick Drying Stain Block - Aerosol White 
Gorilla Wood Glue - Brown 236ml 
Easy-Trim Universal Dry Verge System Terracotta (Box of 50) 
Everbuild Everflex AquaMate Aquarium Sealant – Translucent 295ml 
Everbuild Everflex Premium+ 500 Bath & Sanitary Silicone - White 295ml (Box of 25) 
ALM Code 6 Milled Lead Flashing - 360mm x 3m 
Easy-Trim Universal Dry Verge System - Grey (Box of 50) 
Everbuild General Purpose Silicone - Grey 280ml (Box of 12) 
Everbuild Industrial Superglue HV – Clear 20g 
OX Pro Tough Bucket, Blue - 15 Litre 
Uses
The Evo-Stik Waterproof Wall Tile Adhesive is fantastic for adhering to multiple substrates around the house. The Evo-Stik scientist specifically crafted this formula to stick to ceramic tiles; with a ready-mixed formula, you can apply this to the back of the tile and put it onto the wall in seconds. Some of the substrates this product can adhere to include;
- Plaster
- Plasterboard
- Glazed Tiles
- Brick
- Tile backer boards
- Cement renders
Preparation
Ensure the surfaces are even, dry, clean and grease-free, and any gaps or cracks are filled. If the application area is tiles, ensure they're clean and re-fixed where loose. Remove wallpaper and score paint using coarse sandpaper. New brickwork or plaster must allow four weeks to dry; ensure plaster is primed before application, giving it 1 hour to dry.
Application
- Using a trowel or spreader, apply the ready mixed wall tile adhesive onto the wall, maintaining a depth of 3mm throughout.
- Fix tiles onto the walls within 20 minutes of applying the adhesive, using a twisting action to securely bind the two surfaces together.
- Allow up to 24 hours for the adhesive to cure fully; a non-porous surface will take up to 48 hours.
