FloPlast Ogee Fascia Bracket, Black 
Bond It Rubber Bitumen Emulsion - Black 2.5L 
Everbuild PVCu Acti-Spray – Clear 200ml 
Code 6 Cast Lead - 760mm x 3m 
ALM Code 4 Milled Lead - 1600mm x 3m 
FrogTape® Delicate Surface Masking Tape - Yellow 36mm x 41.1m 
Code 7 Cast Lead - 450mm x 6m 
Soudal Genius Gun Building Adhesive 750ml - Champagne (Box of 12) 
ALM Code 7 Milled Lead - 600mm x 6m 
Siroflex Trade Clearbond Adhesive Internal Use - Clear 290ml 
OX Pro Aluminium Metric Rafters Square - 300mm 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Terracotta (Box of 5) 
Everbuild Everflex Contract 700T LMN Silicone - Bronze (Box of 25) 
SikaMur InjectoCream-100 - White 300ml 
10 x Timloc 3014C Over Fascia Ventilation System 1M - Black 
Everbuild EuroScrim Plasterboard Tape – 48mm x 90m 
ALM Code 3 Milled Lead - 1000mm x 6m 
Timco Collated Drywall Self Drilling Screws 
Ronseal Multi Purpose Wood Filler - Natural 930g 
Everbuild Clear Fix – 290ml 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Black - 300ml (Box of 12) 
Klober Small Slate Vent - Slate Grey 
Left Hand Klober Contract Dry Verge Unit Brown 
Timco Pozi C2 Strong-Fix Twin Cut Screws - 4.0mm x 40mm (Box of 200) 
ALM Code 6 Milled Lead Flashing - 300mm x 6m 
Ronseal Quick Drying Smooth Finish Filler - 600g 
Uses
The Gorilla Super Glue Gel Twin Pack is a powerful, potent glue that's supplied in a small tube but designed for more challenging, tougher jobs. Its formula is powerful enough for horizontal and vertical applications, with a 10-15 second curing time! The bottle is fitted with an anti-clog cap, allowing multiple product uses. Its overall formula has a high performance, and in addition, it can withstand drops and impacts.
Preparation
To achieve optimal results, you should prepare the surface by removing any impurities that can hinder the adhesion, including dirt, dust, grease, oil, loose debris, flaking material, etc. After cleaning the surface, you should ensure it's dry before bonding.
Application
- To puncture the seal on the tube, tighten the white nozzle firmly.
- Apply a small amount of adhesive to one of the surfaces, ensuring you only place one drop per 6.5cm². Ensure you don't over-apply the adhesive, as this can cause delayed curing and, in some instances, failed adhesion.
- Press the surfaces together for 10-45 seconds, and after that time, allow 24 hours for the bond to cure fully.
