FloPlast Ogee Fascia Bracket, White 
Cromar Vent 3 Light Breathable Membrane - 1m x 25m 
ALM Code 3 Milled Lead - 1600mm x 6m 
Timloc Plain Tile Vent Red (Box of 14) 
Everbuild Standard Nozzle - 6 Pack (290mm & 310mm) 
OX Pro Dry Wall Hammer - 14 oz 
ALM Code 5 Milled Lead - 210mm x 3m 
Sika Stone Protector - Clear 5 Litre 
Soudal Genius Gun Soudafoam Window and Door - 600ml 
Everbuild Forever Clear Silicone Sealant – 295ml (Box of 12) 
Timco Twin-Threaded Woodscrew Mixed Tray 
Ronseal Stays White One Coat Non-Drip Paint - Gloss 2.5L 
Everbuild Overlap & Border Adhesive - White 250g 
ALM Code 7 Milled Lead - 1600mm x 6m 
Everbuild Dual Purpose Foam Cleaner – 500ml 
42 x ERidge Dry Fix Ridge System Black – 6m Kit 
Thompson's Stain Block Damp Seal - White 250ml 
Bond It Rubber Bitumen Emulsion - Black 5L 
Code 8 Cast Lead - 914mm x 6m 
Lead Roofing Wood Core Roll (50mm x 2.4m) 
Bond It PVCu Solvent Fast Acting Cleaner - Clear 1L 
Ronseal Precision Finish Brush - 5 Pack 
Bond It Economy Sealant Gun - Blue 900ml 
Bond It Rubber Bitumen Emulsion - Black 25L 
Siroflex Contractors Lead Sheet Silicone - Grey 300ml 
Everbuild Everflex 225 Industrial & Glazing Silicone - White 295ml (Box of 25) 
Uses
The Gorilla Wood Glue is the ultimate wood glue on the market. It offers a virtually unbreakable bond accompanied by excellent resistance to harmful factors, allowing you to have confidence in a long-lasting bond.
Its formula is entirely water-resistant and applied similarly to conventional PVA Glue but provides the bonding strength of Gorilla. This glue dries to a natural colour to prevent unsightly marks, and instead, the colour blends naturally with the wood.
Preparation
To achieve optimal results, clean all surfaces to be bonded, ensuring the wood is sound, stable, and free from contaminants. Remove impurities such as dirt, dust, grease, oil, flaking material, loose debris, organic growth, and wet rot. Shake the bottle vigorously and remix if the material inside the glue has thickened or separated.
Application
- Apply the glue generously to the surface.
- Connect and compress the surfaces together using clamps or weighted objects. This clamping process should last about 20-30 minutes, and the parts should fit tightly.
- Any excess glue can be removed before it's dried using a clean, wet cloth; if it's dried, you'll have to scrape any excess glue off.
