Easy-Trim Over Fascia Vent - 25mm x 500mm (Box of 50) 
OX Pro Tuff Rule - Cyan 
Thompson's Patio & Block Paving Seal - Wet Look 5L 
ALM Code 4 Milled Lead - 390mm x 3m 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml 
Everbuild 502 Wood Adhesive – 5 Litre 
Code 7 Cast Lead - 1000mm x 6m 
Timco Hazard Tape 
Thompson's One Coat Waterseal - 2.5L 
Everbuild Black Jack 908 DPM – 25 Litre 
ALM Code 5 Milled Lead - 1600mm x 3m 
FloPlast Rafter Bracket Top Fix 
Everbuild Everflex AquaMate Aquarium Sealant – Translucent 295ml 
BORA - PM-4500 Speedhorse 
Everbuild General Purpose Silicone - White 280ml (Box of 12) 
Patination Oil Lead Mate Flashing Protection Coating - 500ML 
Ronseal Trade 10Yr Woodstain Satin Walnut 750ml Brown 
Everbuild Seal Rite Strip Out Tool 
Timloc Plain Tile Vent Red (Box of 14) 
Armatool Slate Rip - Stainless Steel 
FloPlast Half Round Fascia Bracket, Brown – 112mm 
Easy-Trim Universal Dry Verge System Black (Box of 50) 
Soudal Trade Gun Grade Expanding Foam - 750ml (Box of 12) 
ALM Code 7 Milled Lead - 800mm x 6m 
OX Tools Winter Set - Beanie, Socks, Thermal Gloves 
Soudal Lead Sheet Sealant 290ml - Grey (Box of 12) 
Easy-Trim Lead R Flashing Smooth – 600mm x 5m 
ALM Code 3 Milled Lead - 390mm x 6m 
FloPlast Half Round Stop End Outlet, White – 112mm 
Bond It The Beast PU Adhesive - Brown 250ml 
SikaBond MS Wood Floor Gun Grade - Parquet Brown 600ml 
Ronseal One Coat Wood Primer & Undercoat - White 750ml 
Everbuild Constructa-Pro Adhesive Foam - Grey 750ml (Box of 12) 
Uses
The Gorilla Wood Glue is a powerful, versatile adhesive that's perfect for application to wooden substrates. It provides an unbreakable bond with excellent water resistance, rated to D3. It's applied similarly to a conventional PVA adhesive but instead is formulated with Gorilla's strength. The glue cures into a natural colour, enabling aesthetically pleasing finishes as it blends naturally with the wood.
Preparation
To ensure that you achieve optimal results, you must clean and prepare the surfaces, removing contaminants such as dirt, dust, grease, oil, loose debris, flaking material, etc. After cleaning and removing the impurities from the surface, ensure it's dried and ready for bonding. If the Wood Glue has separated inside the bottle, shake thoroughly to remix the material.
Application
- Apply the glue to the surface generously.
- Bring the surfaces together and hold for at least 20-30 minutes using clamps or weighted objects.
- Any excess glue before it's cured can be removed using a clean, damp cloth; if the glue has cured, you'll need to scrape it off.
