BORA Centipede 2ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Soudal Soudalead PB Lead Sealant - Grey 300ml (Box of 12) 
Soudal Fix ALL Flexi – Brown 290ml (Box of 12) 
Soudal 30 Min D4 Gel PU Wood Adhesive Trade - 290ml 
Code 5 Cast Lead - 180mm x 6m 
ALM Code 8 Milled Lead - 360mm x 6m 
Code 7 Cast Lead - 760mm x 3m 
Thompsons One Coat Roof Seal - Black 5L 
ALM Code 6 Milled Lead Flashing - 180mm x 6m 
Bond It AS900 Acoustic Sealant - White 900ml 
Right Hand Klober Uni-Click Dry Verge Units Terracotta 
ALM Code 4 Milled Lead - 210mm x 3m 
ALM Code 3 Milled Lead - 1600mm x 3m 
OX Pro Top Steady Nail-On (Veneer) Clamp Set 
Everbuild Stick2 Superglue De-Bonder - 20ml 
ALM Code 7 Milled Lead - 1600mm x 6m 
If you’re laying a lead lined gutter and need a low-cost method of dealing with restricted falls, the Lead Expansion Joint has the problem covered. The Lead Expansion Joint uses a neoprene segment to compensate for lead’s thermal expansion.
Different materials expand at different rates when heated. This can cause damage when lead is fixed in certain positions, since lead expands to a very significant degree when heated. The neoprene segment present in Lead Expansion Joints will stretch and give, allowing this thermal expansion to take place safely. The neoprene itself is integrated into the code 5 lead wings on either side during the vulcanisation process. These wings can then be welded in to the two lead sheets being joined.
