Everbuild Heavy Duty Multi-Use Wonder Wipes Tub (75 Wipes) 
ALM Code 6 Milled Lead Flashing - 240mm x 6m 
ALM Code 3 Milled Lead - 240mm x 6m 
Everbuild 501 PVA - 1 Litre 
Code 5 Cast Lead - 390mm x 3m 
Everbuild Stixall Extreme Power - White 290ml (Box of 12) 
Code 6 Cast Lead - 210mm x 3m 
Everbuild P18 Gas Leak Detector - 400ml (Box of 12) 
Timco Lithium EP2 Grease - 400g 
Everbuild Everflex Premium 145 Butyl Rubber Sealant - Grey 300ml 
Ronseal One Coat Stain Block - White 750ml 
ALM Code 7 Milled Lead - 1000mm x 3m 
Code 3 Cast Lead - 914mm x 3m 
Ronseal Stays White 2in1 Paint & Primer - Gloss 2.5L 
Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 50mm (2000 Pieces) 
Bond It Cover-It Hardfloor & Glass Protector - Blue 625mm X 25M 
Ronseal Crystal Clear Outdoor Varnish - Matt 750ml 
Soudal Parquet & Timber Sealant - Dark Grey 290ml 
Soudal Trade Gun and Foam Cleaner - 500ml 
ALM Code 4 Milled Lead - 850mm x 3m 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
Everbuild Everflex Premium+ 500 Bath & Sanitary Silicone - White 295ml (Box of 25) 
The OX Tools OXIT Sealant & Adhesive delivers ultimate versatility, combining excellent adhesive strength with outstanding joint sealant finishing. Designed for heavy-duty automotive and transportation industries, it also works well for domestic use. Ideal for various applications in and around a property, this sealant resists chemicals, UV light, and water, ensuring durability and reliability.
Preparation
Before applying the OX Tools OXIT Sealant & Adhesive, clean the surface thoroughly to remove all contaminants and ensure strong adhesion. Dirt, dust, grease, oil, flaking material, and loose debris often cause poor performance, so eliminating these impurities is essential.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle with an opening to your desired amount and screw it onto the cartridge.
- Place the cartridge into a suitable applicator tool.
- For sealant jointing, point the tip of the nozzle to the gap and apply a singular bead along the gap, smoothing it down afterwards using a sealant applicator tool.
