Code 4 Cast Lead - 510mm x 3m 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Brown (Box of 5) 
Ronseal Stays White Ultra Tough White Satin Paint - 750ml 
Code 6 Cast Lead - 450mm x 3m 
Bond It Pro-Mate LMA Silicone - White EU3 
Ronseal Wet Rot Wood Hardener - 750ml 
Ronseal 3 in 1 Mould Killer - 500ml 
Ronseal Interior Varnish - Clear Gloss 2.5L 
Ronseal Knot Block Primer & Undercoat - White 2.5L 
Ronseal Ultra Tough Satincoat Clear Varnish - 5L 
Bondit Monster Mesh Pink 50m x 1m - 160g/m2 
Klober Single Pantile Vent - Brown KG9860-0247 (Box of 10) 
ALM Code 4 Milled Lead - 210mm x 6m 
Gorilla Tape - Black (48mm x 32m) 
Everbuild PVC Hazard Tape - Black/Yellow (50mm x 33m) 
Bond It High Gloss Block Sealer - Clear 5L 
Everbuild Lumberjack 5 Minute Polyurethane Wood Adhesive Liquid – 750ml 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml 
Code 8 Cast Lead - 1200mm x 6m 
Soudal PVCu Cream Cleaner - 1L 
Uses
The Anti-Condensation Paint by Ronseal is a high-quality, uniquely formulated paint that completely controls condensation, mould, and general damp issues. This paint, when applied, delivers an added layer of insulation, protecting the paint and your wall from unsightly damage. This type of paint is suitable for scrubbing down when cleaning, making it perfect for bathrooms and kitchens.
Preparation
Before commencing the application, you should prepare the surface. Clean it down to remove any contaminants, and if the surface has mould present, use a dedicated mould killer to remove it. You should not sand it away; all this does is spread the pores, which causes it to spread.
Application
- When opening the tin, thoroughly stir it to mix all the pigments.
- Apply the paint directly to the wall using a brush or roller, ensuring you don't spread it too thinly.
- Allow 4 hours for the first coat to dry, then apply a second. The surface will be touch dry in 2 hours but suitable for painting over in 4 hours.
Aftercare
This paint can be used as a top coat or undercoat; if an undercoat is your intention, you should wait 4 hours for it to dry before applying it. Any leftover paint on tools should be removed and cleaned using warm, soapy water.
