Timco Flat Wood Bit Set 
Armatool Lead Dresser Set - 5 Piece Set 
Lead Sheet Cleaner - 1 Litre 
Everbuild P13 Plumbers Putty - Beige 750g 
Everbuild Lumberjack 550 Floor Adhesive – 600ml (Box of 12) 
Easy-Trim Lead R Flashing Smooth – 450mm x 5m 
Timloc Plain Tile Vent Terracotta (Box of 14) 
Spax Magnetic Bit Holder - 1 Piece 
Everbuild Febond PVA - 2.5L 
Bond It Monster Scrim Drywall Tape - White 48mm x 90m 
ALM Code 3 Milled Lead - 1600mm x 6m 
Sika 1 Waterproofer – 5 Litre 
Everbuild PVCu Solvent Cleaner – 1 Litre (Box of 12) 
Soudal Repair Express Plaster - White 290ml 
Everbuild P11 Central Heating System Cleanser – 1 Litre 
Soudal Grab Solvent Based Adhesive, Beige 
FrogTape® Delicate Surface Masking Tape - Yellow 36mm x 41.1m 
Everbuild 506 Universal Contractors PVA - 5Kg White 
Bond It Rain-Mate All Weather Sealant - Clear EU3 
20 x Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit 
Bond It Wood Pro High Strength Flexible Hybrid Adhesive - EU3 Buff 
Everbuild P18 Gas Leak Detector - 400ml (Box of 12) 
Everbuild Multi-Use Wonder Wipes Tub (Box of 12) 
Everbuild Lumberjack 5 Minute Polyurethane Wood Adhesive Liquid – 750ml (Box of 12) 
Bondit Monster Mesh Pink 50m x 1m - 160g/m2 
Bond It All Weather Roofing Compound - Black 5L 
ERoofing Lead Hall Clips – Pack of 50 
Code 3 Cast Lead - 510mm x 6m 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Slate Grey (Box of 5) 
Timloc 1203 Underfloor Vent Horizontal Front Extension + 115mm 
Code 7 Cast Lead - 240mm x 6m 
Bond It Sealant Applicator Tool 
OB41 White Grease Spray - 400ml 
Uses
The Anti-Condensation Paint by Ronseal is a high-quality, uniquely formulated paint that completely controls condensation, mould, and general damp issues. This paint, when applied, delivers an added layer of insulation, protecting the paint and your wall from unsightly damage. This type of paint is suitable for scrubbing down when cleaning, making it perfect for bathrooms and kitchens.
Preparation
Before commencing the application, you should prepare the surface. Clean it down to remove any contaminants, and if the surface has mould present, use a dedicated mould killer to remove it. You should not sand it away; all this does is spread the pores, which causes it to spread.
Application
- When opening the tin, thoroughly stir it to mix all the pigments.
- Apply the paint directly to the wall using a brush or roller, ensuring you don't spread it too thinly.
- Allow 4 hours for the first coat to dry, then apply a second. The surface will be touch dry in 2 hours but suitable for painting over in 4 hours.
Aftercare
This paint can be used as a top coat or undercoat; if an undercoat is your intention, you should wait 4 hours for it to dry before applying it. Any leftover paint on tools should be removed and cleaned using warm, soapy water.
