Bond It B3 Fill And Fix Expanding Foam Gun Grade - Beige 750ml 
EVO-STIK Sticks Like All Weather Adhesive - Clear 290ml 
ALM Code 8 Milled Lead - 450mm x 6m 
Everbuild KOS Black Fire Cement - 1kg 
Klober Plain Roof Tile Vent Adaptor - KG990500 
ALM Code 5 Milled Lead - 510mm x 3m 
Everbuild Showerproof Bathroom Silicone - Clear 280ml (Box of 12) 
Everflex Premium+ 450 Builders Silicone – Grey (Box of 12) 
Everbuild Stixall Extreme Power – Clear 290ml 
Bond It Contractors Grade PVA - White 500ml 
Thompson's uPVC Restorer - 480ml 
Code 7 Cast Lead - 300mm x 3m 
Code 5 Cast Lead - 1200mm x 3m 
Ulti-Mate Plain Tile Vent Adaptor 
FloPlast Square Union Unit - Black 
ALM Code 6 Milled Lead Flashing - 760mm x 6m 
Evo-Stik Gripfill Extra Multi-Purpose - Buff 350ml 
Ronseal Knot Block Primer & Undercoat - White 2.5L 
Bond It AS900 Acoustic Sealant - White 900ml 
Freeflow 112mm Round Union Gutter Bracket - White 
FloPlast Square to Round Downpipe Adaptor - Black 
Timco Impact Driver Bit Set 
Easy-Trim Over Fascia Vent - 25mm x 500mm (Box of 50) 
Ronseal Fence Life Brush - 4" 
The Ronseal Diamond Hard Doorstep Paint - Black Satin 250ml is the go-to choice for anyone looking to bring life and colour to their front door. This thick pigmented paint delivers a vibrant, long-lasting colour that's resistant to various scuffs, knocks and scratches. Ideal for novice D.I.Yers or tradespeople, this product is easy to apply directly from the tin.
Preparation
You must apply this on a dry day when the temperature is above 10°C. Brush your steps thoroughly, removing leaves, moss and twigs, ensuring that it's just a plain substrate using warm, soapy water to wash the surface.
If they have been previously painted, use a wire brush to remove any loose flaking paint, then apply white spirit to clean the surface. Afterwards, ensure the surface is dry before commencing the application.
Application
- Open the tin of paint and thoroughly stir it, making sure all the pigments are mixed.
- Using a brush, apply the first coat to the surface and allow four to six hours for the paint to dry, then apply the second coat.
- Allow another four to six hours for the second coat to dry; you can walk over it once it has.
- After 24 hours, the surface will be completely hard and dry, and the diamond-hard protection will activate.
Aftercare
Looking after the surface is easy, ensuring no loose debris, e.g. twigs, sticks, leaves, or moss growing.
