Ronseal One Coat All Surface Primer and Undercoat - White 250ml 
Soudal Acetoxy Stay Fresh Sanitary Silicone Sealant – Ice White 290ml 
Everbuild Black Jack 908 DPM – 5 Litre 
Code 7 Cast Lead - 850mm x 3m 
Timco Mixed Plasterboard Fixings 
Bond It Economy Sealant Gun - Blue 400ml (EU3 + EU4) 
Everbuild Wood Filler Hardener / Catalyst - 40g 
Everbuild Stick2 Superglue De-Bonder - 20ml 
Everbuild Forever White Silicone Sealant – 295ml 
Everbuild Clear Fix – 290ml 
Ronseal Ultra Tough Mattcoat Clear Varnish - 2.5L 
Ronseal Diamond Hard Doorstep Paint - Black Satin 750ml 
ALM Code 3 Milled Lead - 240mm x 6m 
Gorilla Tape - Black (48mm x 32m) 
Bond It Rain-Mate All Weather Sealant - White EU3 
ALM Code 5 Milled Lead - 450mm x 3m 
Everbuild EB25 Ultimate Sealant & Adhesive – Anthracite 300ml (Box of 12) 
Cromar Bitumen Primer – Black 5 Litre 
OX Pro Grout Remover Replacement Blades 50mm - Pack 2 
Armatool Flooring Kneepads 
OX Pro Electricians Chisel - 2¼" X 10" 
Bond It The Beast PU Adhesive - Brown 500ml 
Siroflex Trade Superglue Activator Spray - 200ml 
The Ronseal Diamond Hard Doorstep Paint - Black Satin 250ml is the go-to choice for anyone looking to bring life and colour to their front door. This thick pigmented paint delivers a vibrant, long-lasting colour that's resistant to various scuffs, knocks and scratches. Ideal for novice D.I.Yers or tradespeople, this product is easy to apply directly from the tin.
Preparation
You must apply this on a dry day when the temperature is above 10°C. Brush your steps thoroughly, removing leaves, moss and twigs, ensuring that it's just a plain substrate using warm, soapy water to wash the surface.
If they have been previously painted, use a wire brush to remove any loose flaking paint, then apply white spirit to clean the surface. Afterwards, ensure the surface is dry before commencing the application.
Application
- Open the tin of paint and thoroughly stir it, making sure all the pigments are mixed.
- Using a brush, apply the first coat to the surface and allow four to six hours for the paint to dry, then apply the second coat.
- Allow another four to six hours for the second coat to dry; you can walk over it once it has.
- After 24 hours, the surface will be completely hard and dry, and the diamond-hard protection will activate.
Aftercare
Looking after the surface is easy, ensuring no loose debris, e.g. twigs, sticks, leaves, or moss growing.
