Everbuild Stixall Extreme Power – White 290ml 
Timco 30mm Cladding Pin - 250 Pieces 
Bond It PVCu Solvent Fast Acting Cleaner - Clear 1L 
Hedgehog Gutterbrush Clips (Pack of 20) 
Bond It Trowel Mastic - Black 2.5L 
Bond It Bitumen Paint - Black 25L 
Easy-Trim Universal Dry Verge System - Brown (Box of 50) 
Soudal PTFE Spray - 400ml 
OB41 Fast Tack Contact Adhesive Spray - 500ml 
Armatool Mop Heads Size 12 
Everbuild Pinkgrip Adhesive Solvent Based – 350ml 
Soudal Genius Gun Building Adhesive 750ml - Champagne (Box of 12) 
Easy-Trim End Cap Half Round - Black (Box of 10) 
Freeflow 65mm Square Down Pipe Connector - Black 
ALM Code 3 Milled Lead - 150mm x 3m 
OX Pro Heavy Duty Aviation Snips Right Cut (Green) 
Samac Snowguard - 150mm x 2m 
Bond It SBR Admixture - White 2.5L 
OX Tools Winter Set - Beanie, Socks, Thermal Gloves 
Bond It Aluminium Foil Tape - 75mm x 45M 
Soudal Water Stop Roof Repair Compound – Grey 4kg 
Hedgehog Gutter Brush Leaf Guard White – 4m x 100mm 
Ronseal 6 Year Anti Mould Paint - White Silk 2.5L 
Everbuild Mitre Fast Industrial Kit Superglue & Activator 
FloPlast Half Round Internal Stop End, White – 112mm 
Timloc Interlocking Plain Tile Vent Grey (Box of 12) 
OX Tools Pro Plasterers' Hawk - 330mm x 330mm 
The Ronseal Diamond Hard Floor Wax - Natural Oak 2.5L offers the ultimate protection for your floors, delivering outstanding diamond-hard protection with a beautiful natural finish. The low-odour formula created by the Ronseal Scientist prevents any unwanted waxing smell from lingering whilst still effectively covering up to 16m².
Preparation
You should prepare the surface by sanding it down using a floor sander or 120-grit sandpaper. Any previously painted or treated floors must have their coating entirely removed, and when sanding the surface, you should ventilate the area and wear a mask. Once you've done with the sanding, wipe the floor with white spirit and a cloth to remove any leftover dust.
Application
- When opening the tin, stir thoroughly to break up any formed lumps.
- Apply the wax directly to the surface and brush toward the woodgrain; avoid overlapping whilst applying the product.
- You should wait 2 hours before applying the second coat.
- Before applying the final coat, lightly sand the floor to help the adhesion of the wax
- After completing the application, you must wait 8 hours before walking back on the floor and allow 24 hours to pass before moving furniture into the room.
Aftercare
To maintain the floor, you should regularly clean it, removing contaminants that can damage it. If you notice any damage to the floor over time, lightly sand the area and re-apply the wax; then, it'll be as good as new.
