Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 38mm (2000 Pieces) 
FloPlast Square Line Pipe Connector White 
Samac Snowguard - 225mm x 2m 
Code 7 Cast Lead - 390mm x 3m 
Ronseal Stays White Ultra Tough White Matt Paint - 750ML 
OX Pro Dry Wall External Corner Trowel - 100mm x 125mm 
FloPlast Round 92½° Bend - White 
Timco Hazard Tape 
Code 3 Cast Lead - 600mm x 6m 
Code 5 Cast Lead - 240mm x 6m 
ALM Code 3 Milled Lead - 360mm x 6m 
Soudal Mitre Kit 50g + 200ml - Clear (Box of 12) 
ALM Code 8 Milled Lead - 1200mm x 3m 
Code 6 Cast Lead - 180mm x 3m 
Timco Twin-Cut C2 Floor-Fix Screws - 4.2mm x 55mm (Tub of 250) 
Lead Hall Fixing Clips - Pack of 50 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Brown (Box of 5) 
Armatool Mop Heads Size 12 
Klober Single Pantile Vent - Brown KG9860-0247 (Box of 10) 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
Ronseal Multi Purpose Smooth Finish Filler - 330g 
Everbuild Pro Blue Masking Tape - 25mm x 33mm 
Bond It Rain-Mate All Weather Sealant Black EU3 - Box of 12 
Everbuild Wood Filler Hardener / Catalyst - 40g 
FloPlast Half Round Union Unit - White 
Soudafoam Gap Filler Genius Gun - 600ml 
Uses
The Exterior Multi-Purpose Smooth Finish Filler by Ronseal is a perfect gap-filling product for exterior applications. With excellent weathering resistance, including frost and water, this product also delivers durability and robustness, offering long-lasting application. Delivered in a ready-to-use tub, you can easily apply this product, and it dries within a couple of hours, perfect for a quick job to do on the weekend.
Preparation
Before starting the application, clean the surface thoroughly, removing any contaminants that can hinder the adhesion.
Application
- Apply the filler directly into the gap, pressing firmly, ensuring it reaches all corners of the void. You should apply enough filler so it fills the gap and slightly protrudes out.
- Before the filler dries, smooth it out using a wet knife.
- The drying time is about 1-2 hours; wait patiently, and then you can redecorate on top of it.
- If you want to fill a gap more significant than 20mm, you'll need to apply the filler into the void at 20mm at a time, let it cure and dry, and then apply another 20mm until the void is entirely filled.
Aftercare
Remove as much of the product from any tools; anything left over can be cleaned with warm, soapy water.
