Klober Universal Tile Vent Brown KG9854 (Box of 10) 
Everbuild Black Jack 905 All Weather Roof Coating – 5 Litre 
Armatool Longo Chalk Reel 30m & Fluorescent Chalk Orange 
Bond It Mould Stop - Clear 1L 
Siroflex PVCu Trim & Mitre Cutter 
Code 3 Cast Lead - 600mm x 3m 
Everbuild Everflex 200 Contractors LMA Silicone - Transparent 295ml (Box of 25) 
Ronseal 3 in 1 Basecoat - White 2.5L 
Timco M6 Zip-Fix Cavity Wall Fixing - 10 Pieces 
Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
Cromar Vent 3 Classic Breathable Membrane - 1.5m x 50m 
OX Pro Electricians Chisel - 2¼" X 10" 
Timloc Underlay Felt Lap Vent 
Soudal Silirub 2, White - 300ml 
Ronseal Stays White Ultra Tough White Gloss Paint - 750ML 
OX Pro Pool Trowel, Rigid 450MM / 18" 
Everbuild Mitre Fast Activator – 200ml 
FloPlast Universal Hopper, White – 65-68mm 
Timco Lifting Sling 3000kg Limit - 3m x 90mm 
ALM Code 6 Milled Lead Flashing - 510mm x 6m 
Ronseal 6 Year Anti Mould Paint - White Silk 2.5L 
Armatool 30m Longo Chalk Line 
Bond It PVA & Adhesive Sealer - White 1L 
Samac Copper Wire Coil 36m x 2mm 
Estwing Hammer Curved Claw Smooth Face - 20oz 
Bond It All Weather Roofing Compound - Black 25L 
Timco Velocity Premium Multi-Use Screws - Mixed Tray 
Soudal 5 Min D4 Gel PU Wood Adhesive Trade - 290ml 
FloPlast Half Round Union Unit - White 
Ronseal Diamond Hard Doorstep Paint - Black Satin 750ml 
Ronseal Diamond Hard Doorstep Paint - Tile Red Satin 750ml 
Uses
The Interior Varnish by Ronseals offers your surface the ultimate protection. Using its diamond-hard formula, it cures into a robust, long-lasting shield. With its easy-to-apply application, the most novice of D.I.Yer can easily apply this product to an outstanding level, making it accessible to everyone. Available in various sizes and colours, you can confidently find a colour that works for you on our ERoofing store.
Preparation
Please note that this product can be applied onto bare and previously varnished wood but not painted. You should clean the surface from contaminants such as dirt, oil and grease using White Spirit and a cloth. After, sand the surface to an even finish using 120-grit sandpaper, removing any old varnish, etc. Let the dust settle and wipe it away with a damp cloth, leaving the wood to thoroughly dry before varnishing.
Application
- Stir the varnish thoroughly, ensuring you smooth out any lumps.
- Apply the wax to the surface using a brush, stroking it into the wood following the woodgrains.
- Give it about an hour to dry, then apply a 2nd coat. If this is the last coat you intend to do, lightly sand the surface before applying it. It is the same for the 3rd coat; if that's the last one you intend to do, sand it down slightly, then apply it for an optimal finish.
Aftercare
After your final coat has dried, you can clean your wood like normal. Ensure you remove any contaminants regularly that can harm the surface and your hard work. If there is damage on the surface, lightly sand the area down and then reapply a couple of coats.
