Soudal 30 Min D4 Gel PU Wood Adhesive Trade - 290ml 
FloPlast Side Fix Rafter Bracket 
Thompson's One Coat Concrete Seal - 5L 
DeWalt FLEXTORQ Set PZ2 + Drive Guide in Small Bulk Storage Case 
Roofer Doofer – The Ultimate Roofing Tool 
Bond It PVA & Adhesive Sealer - White 5L 
10 x Timloc 3014C Over Fascia Ventilation System 1M - Black 
Code 8 Cast Lead - 390mm x 6m 
OX Tuff Carbon Marking Pencil Value Pack 
FloPlast Half Round Internal Stop End, Black – 112mm 
OX Pro Grout Remover 
Klober Profile-Line Twin Plain Tile Vent - Terracotta KG9861-0152 (Box of 10) 
Cromar Vent 3 Classic Breathable Membrane - 1.5m x 50m 
FaithFull Soft Grip Chisel - 4 Piece Set 
Sika MultiSeal Self Adhesive Bituminous Sealing Tape - (300mm x 10m) 
Bond It SBR Admixture - White 5L 
Spax Pozi Pz3 Drill Bits - 25mm (Pack of 5) 
Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 38mm (2000 Pieces) 
Oxyturbo Oxygen Refill 
Bond It Rubber Bitumen Emulsion - Black 2.5L 
Soudal Genius Gun Gap Filling and Expanding Foam - 500ml 
Siroflex Trade High Viscosity Superglue - 20g 
ALM Code 8 Milled Lead - 150mm x 6m 
Everbuild Forever White Silicone Sealant – 295ml 
Ronseal One Coat Stays White Radiator Paint - Matt 250ml 
Uses
The Interior Wax by Ronseal is a high-quality wax that allows even the most novice of D.I.Yers to exceed at applying this product due to its easy-to-apply application. It has a unique drying time of only 20 minutes, allowing you to complete all three coats within a couple of hours. Offering a coverage of up to 16m² per litre, you can effectively stain an object with just one 750ml tin.
Preparation
Remove any present old wax, grease or oil using White Spirit and a cloth. After that, you should lightly sand the surface to an even finish using 120-grit sandpaper, wiping away any dust that settles after you've sanded. Leave the surface to dry before waxing.
Application
- Due to the liquidity of the wax, you should thoroughly stir it to even out any lumps that may have built
- Apply the first coat, using a brush stroking in the direction of the grain. Give it 1 hour to fully dry
- For optimal results, apply three coats. Note that the final coat will only take 20 minutes to dry.
Aftercare
Due to the natural diamond-hard nature of the wax, spillages will be hard to clean up but can be done, but only if dealt with immediately.
