Ronseal Anti-Condensation Paint - Matt White 750ml 
OX Pro Pool Trowel, Rigid 450MM / 18" 
Bond It Duct Tape - Silver 48mm x 45M 
Everbuild Jumbo Mitre Fast Kit Superglue & Activator 
Cromar Vent 3 Pro Breathable Membrane 1m x 50m 
Spax Magnetic Bit Holder - 1 Piece 
Bond It Rain-Mate All Weather Sealant Black EU3 - Box of 12 
Siroflex PVCu Trim & Mitre Cutter 
FloPlast Half Round Downpipe 112° Bend, Brown 
Klober Univeral Angle Ridge End - Grey 
Everbuild Everflex Contract AC95 Intumescent Sealant & Adhesive - 900ml 
Bond It Contractors PVA - 5L White 
Code 6 Cast Lead - 800mm x 6m 
Lead Roofing Wood Core Roll (50mm x 2.4m) 
Soudal Neoprene Contact Adhesive Liquid Glue 44A – 50ml 
Timco Cloth Tape White - 50m x 48mm 
Bond It Cyanoacrylate Superglue Medium Viscosity, Clear - 50g 
Everbuild Showerproof Bathroom Silicone – White 280ml 
ALM Code 6 Milled Lead Flashing - 390mm x 6m 
Bond It Roof-Mate Roof & Gutter Sealant - Black EU3 
Isoflex Special Primer - 750ml 
Soudal Trade Gun and Foam Cleaner - 500ml 
Everbuild Lumberjack 550 Floor Adhesive – 600ml (Box of 12) 
Everbuild Everflex Premium+ 500 Bath & Sanitary Silicone - White 295ml (Box of 25) 
Soudal Genius Gun Gap Filling and Expanding Foam - 500ml 
Ronseal One Coat Damp Seal - White 2.5L 
Uses
The Interior Wax by Ronseal is a high-quality wax that allows even the most novice of D.I.Yers to exceed at applying this product due to its easy-to-apply application. It has a unique drying time of only 20 minutes, allowing you to complete all three coats within a couple of hours. Offering a coverage of up to 16m² per litre, you can effectively stain an object with just one 750ml tin.
Preparation
Remove any present old wax, grease or oil using White Spirit and a cloth. After that, you should lightly sand the surface to an even finish using 120-grit sandpaper, wiping away any dust that settles after you've sanded. Leave the surface to dry before waxing.
Application
- Due to the liquidity of the wax, you should thoroughly stir it to even out any lumps that may have built
- Apply the first coat, using a brush stroking in the direction of the grain. Give it 1 hour to fully dry
- For optimal results, apply three coats. Note that the final coat will only take 20 minutes to dry.
Aftercare
Due to the natural diamond-hard nature of the wax, spillages will be hard to clean up but can be done, but only if dealt with immediately.
