ALM Code 4 Milled Lead - 390mm x 6m 
Siroflex Trade High Viscosity Superglue - 50g 
Bond It B1 Fire Resistant PU Gun Grade Expanding Foam - Pink 750ml 
FloPlast Half Round Pipe Socket, Brown 
OX Pro Chalk Refill, Yellow – 226g 
Everbuild 501 PVA – 500ml 
Ronseal One Coat All Surface Primer and Undercoat - White 750ml 
Ronseal One Coat Stain Block - White 2.5L 
Lead Sheet Restorer - G1 
OX Trade Stubby Level - 100mm 
EVO-STIK Stick Like Sh*t - White 290ml 
Cromar Alphachem Liquid Mortar Tone - Black 5L 
Siroflex Seal & Fix Hybrid Adhesive & Sealant - Black 290ml 
Code 7 Cast Lead - 850mm x 6m 
Timco Pozi C2 Strong-Fix Twin Cut Screws - 4.0mm x 40mm (Box of 200) 
Bond It High Gloss Block Sealer - Clear 5L 
Freeflow 112mm Round Union Gutter Bracket - White 
Ronseal Exterior Yacht Varnish - Satin 2.5L 
Uses
The Interior Wax by Ronseal is a high-quality wax that allows even the most novice of D.I.Yers to exceed at applying this product due to its easy-to-apply application. It has a unique drying time of only 20 minutes, allowing you to complete all three coats within a couple of hours. Offering a coverage of up to 16m² per litre, you can effectively stain an object with just one 750ml tin.
Preparation
Remove any present old wax, grease or oil using White Spirit and a cloth. After that, you should lightly sand the surface to an even finish using 120-grit sandpaper, wiping away any dust that settles after you've sanded. Leave the surface to dry before waxing.
Application
- Due to the liquidity of the wax, you should thoroughly stir it to even out any lumps that may have built
- Apply the first coat, using a brush stroking in the direction of the grain. Give it 1 hour to fully dry
- For optimal results, apply three coats. Note that the final coat will only take 20 minutes to dry.
Aftercare
Due to the natural diamond-hard nature of the wax, spillages will be hard to clean up but can be done, but only if dealt with immediately.
