Ox Pro Ultraflex Finishing Trowel - 16" (405mm x 110mm) 
SikaFlex 221 Adhesive & Sealant - Black 300ml (Box of 12) 
Ronseal Stays White Ultra Tough White Gloss Paint - 2.5L 
Code 4 Cast Lead - 300mm x 3m 
OX Pro Tuff Rule - Cyan 
Everbuild Industrial Superglue HV – Clear 20g 
Ronseal Stays White One Coat Non-Drip Paint - Matt 750ml 
Ronseal One Coat Stays White Radiator Paint - Matt 250ml 
Gorilla Super Glue Gel Twin Pack - Clear 3g 
Bostik Penetration Primer For Roofs, Black - 5 Litre 
OX Pro Mini Square Mouth Shovel 
OX Tools Pro Heavy Duty Flexi Tub - 42L 
FloPlast Round Line Downpipe Clip, Black 
OX Tools Pro Torpedo Level, 9" / 230mm 
Klober Profile-Line Flat Tile Vent - Brown KG9856-3-0247 (Box of 10) 
Everbuild Forever Clear Silicone Sealant – 295ml (Box of 12) 
FloPlast Round 92½° Bend - Brown 
ALM Code 8 Milled Lead - 1200mm x 3m 
ALM Code 6 Milled Lead Flashing - 210mm x 6m 
Soudal Gap Filler Expanding Foam Genius Gun 300ml - Champagne 
Everbuild Power Pro Sealant Gun - 290 to 380ml (Box of 12) 
Bond It B3 Fill And Fix Expanding Foam Aerosol - Beige 500ml 
Sika Patio Seal – 5 Litre 
Uses
The Kitchen & Bathroom Touch-Up Enamel by Ronseal delivers fantastic repairs for your delicate ceramic, porcelain, acrylic and fibreglass surfaces. This product is simple and quick to use, allowing even the most novice of D.I.Yer to repair their surfaces effectively.
Preparation
Lightly sand the affected area, cleaning it afterwards, using a damp cloth, and removing all contaminants that can interfere with the product.
Application
- Thoroughly shake the bottle for several minutes before using it.
- Brush the first coat onto the area.
- Allow it to dry for two hours. After drying, apply another coat or two, giving two hours of drying time between them.
- After you've applied the final coat, allow it 24 hours before getting it wet. The surface will be touch-dry after an hour, but wait four days before submerging it in water.
Aftercare
Once it's dried, you can clean it how you would normally. Clean the area and apply another coat if you notice any further chips or scratches.
