Bond It PVA & Adhesive Sealer White 500ml - Box of 20 
Ronseal Multi Purpose Smooth Finish Filler - 330g 
Ronseal Quick Drying Radiator Spray Paint - White Gloss 400ml 
Restec 1010 Liquid Catalyst - 5kg 
Everbuild Coving Adhesive & Joint Filler - 290ml 
Everbuild Mammoth Barrier Tape - Red/White (72mm x 500m) 
Klober Universal Vent 100mm Adaptor - KG968300-1 
Cromar Black Bitumen Paint – 1 Litre 
ALM Code 7 Milled Lead - 1000mm x 3m 
Everbuild Everflex Premium+ 500 Bath & Sanitary Silicone - White 295ml (Box of 25) 
Everbuild Tecnic Silicone 825 – Magnolia 380ml (Box of 25) 
FloPlast Square to Round Downpipe Adaptor - Brown 
Everbuild Wood Filler Hardener / Catalyst - 40g 
Code 4 Cast Lead - 300mm x 3m 
ALM Code 5 Milled Lead - 1000mm x 3m 
Code 8 Cast Lead - 450mm x 3m 
OX Pro Chalk Refill, Red - 226g 
Ronseal 6 Year Anti Mould Paint - White Silk 2.5L 
Uses
The Kitchen & Bathroom Touch-Up Enamel by Ronseal delivers fantastic repairs for your delicate ceramic, porcelain, acrylic and fibreglass surfaces. This product is simple and quick to use, allowing even the most novice of D.I.Yer to repair their surfaces effectively.
Preparation
Lightly sand the affected area, cleaning it afterwards, using a damp cloth, and removing all contaminants that can interfere with the product.
Application
- Thoroughly shake the bottle for several minutes before using it.
- Brush the first coat onto the area.
- Allow it to dry for two hours. After drying, apply another coat or two, giving two hours of drying time between them.
- After you've applied the final coat, allow it 24 hours before getting it wet. The surface will be touch-dry after an hour, but wait four days before submerging it in water.
Aftercare
Once it's dried, you can clean it how you would normally. Clean the area and apply another coat if you notice any further chips or scratches.
