Everbuild Forever White Powder Wall Tile Grout – 1.2kg 
Siroflex Trade Hand Held PU Expanding Foam 
Timco Classic Pozi Multi-Purpose Screws - Mixed Tray 
Soudal Genius Gun Building Adhesive 750ml - Champagne 
FloPlast Ogee Fascia Bracket, Black 
Bond It Saves Nails Instant Grab Adhesive - EU3 Beige 
ALM Code 4 Milled Lead - 760mm x 6m 
ALM Code 8 Milled Lead - 360mm x 6m 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 200ml 
FloPlast Square Line Running Outlet Black – 114mm x 65mm 
OX Pro Rodless Sealant Gun - Up to 400ml 
Siroflex Trade Strength Glue Screws SF Adhesive 
Klober 20K Slate Vent KG9795-0429 Slate Grey 
Everbuild Maximum Torque - White 290ml 
Code 8 Cast Lead - 850mm x 6m 
Soudal Aquafix All Weather Sealant – Clear 300ml 
Timloc Felt Support Tray 600mm 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
Everbuild Forever White Silicone Sealant – 295ml 
ALM Code 3 Milled Lead - 150mm x 3m 
ALM Code 7 Milled Lead - 180mm x 3m 
Everbuild Superflow Sealant Gun - C3 (290ml - 310ml) 
Uses
The Multi-Purpose Powder Smooth Filler by Ronseal delivers excellent, quick internal repairs for various surfaces. Its high-quality formula offers a robust, long-lasting repair supporting gaps up to 40mm. Some of the surfaces that this product is suitable for include;
- Plaster (Internal only)
- Stone (Internal & External)
- Concrete (Internal & External)
- Wood (Internal & External)
Preparation
Before applying, ensure you prepare the surface to optimise the adhesion. To clean the area, wipe it down, removing any dust, grease, dirt and other contaminants that can interfere with the bonding.
Application
- Using the measuring scoop, measure 2 parts filler and mix it with 1 part water.
- Fill the hole using the formula you've created, ensuring you cover all cracks and crevices.
- Smooth it down with a wet knife once you've filled the area, but make sure it bulges out slightly to allow sanding when dry for a smooth, flush finish.
- If the gap is more significant than 40mm, apply in intervals of 40mm, giving a couple of hours to dry between each layer.
- After filling the entire area, give it a couple of hours to dry and then sand it down.
Aftercare
Remove any excess formula on any tools using a damp cloth
