OX Pro Chalk Refill, Red - 226g 
Bora Workhorse Single Piece Stand with Folding Legs PM-3350 
ALM Code 3 Milled Lead - 1200mm x 6m 
ALM Code 4 Milled Lead - 300mm x 3m 
Everbuild Stainblock - White 400ml 
Pro Magnetic Combination Square - 300mm 
Bond It 5 Minute PU Wood Gel Translucent 300ml - Box of 12 
Code 6 Cast Lead - 240mm x 6m 
Code 7 Cast Lead - 210mm x 6m 
Bostik Fast-Tak Permanent Adhesive - 500ml 
Code 4 Cast Lead - 150mm x 6m 
Bond It Caulk-Mate One Hour Decorators Caulk - White EU3 
Timloc Universal Slate Roof Vent PVC Pipe Only 
ALM Code 7 Milled Lead - 760mm x 6m 
Ronseal uPVC Paint - Royal Blue Satin 750ml 
Code 5 Cast Lead - 510mm x 6m 
OX Tools Pro PolyZip 4 Piece Cutter Set - (15, 22, 35, 42mm) 
OX Spectrum Trade XL Mortar Raking Diamond Blade 115/22.23mm 
ALM Lead Expansion Joint - Code 5 - 260mm x 3m 
Bond It Professional Foam Gun Applicator 1M 
FloPlast Square Line Pipe Connector Black 
ALM Code 5 Milled Lead - 1600mm x 6m 
OX Tools OXIT Sealant & Adhesive - White 290ml (Box of 12) 
Everbuild Everflex 195 Siliconised Acrylic Sealant - White 300ml 
Code 8 Cast Lead - 850mm x 3m 
Soudal Fix ALL Turbo - White 290ml 
Soudal Water Stop Roof Repair Compound – Grey 4kg 
Colron Liquid Scratch Cover - Medium 14ml 
Samac Silicone Bronze Nails - 1kg (31mm x 1.8mm) 
OX Trade Torpedo Level 230mm / 9in 
Soudal Silicone Sealant Remover, Clear - 100ml 
Uses
The Multi-Purpose Powder Smooth Filler by Ronseal delivers excellent, quick internal repairs for various surfaces. Its high-quality formula offers a robust, long-lasting repair supporting gaps up to 40mm. Some of the surfaces that this product is suitable for include;
- Plaster (Internal only)
- Stone (Internal & External)
- Concrete (Internal & External)
- Wood (Internal & External)
Preparation
Before applying, ensure you prepare the surface to optimise the adhesion. To clean the area, wipe it down, removing any dust, grease, dirt and other contaminants that can interfere with the bonding.
Application
- Using the measuring scoop, measure 2 parts filler and mix it with 1 part water.
- Fill the hole using the formula you've created, ensuring you cover all cracks and crevices.
- Smooth it down with a wet knife once you've filled the area, but make sure it bulges out slightly to allow sanding when dry for a smooth, flush finish.
- If the gap is more significant than 40mm, apply in intervals of 40mm, giving a couple of hours to dry between each layer.
- After filling the entire area, give it a couple of hours to dry and then sand it down.
Aftercare
Remove any excess formula on any tools using a damp cloth
