Hambleside Danelaw Double Pantile Vent TV15/2 - Brown (Box of 5) 
ALM Code 3 Milled Lead - 1200mm x 3m 
OX Pro Semi Round Dutch Pin, Swivel Arm - 4 Pack 
Everbuild Stick2 Industrial Superglue GP - Transparent 20g (Box of 20) 
Timloc Eaves Comb Filler 1m 
Soudal Fix ALL Turbo - Grey 290ml 
Everbuild Everflex AquaMate Aquarium Sealant – Translucent 295ml 
Everbuild Salt-Away Salt Remover – 5 Litre 
ALM Code 8 Milled Lead - 150mm x 6m 
Everbuild Everflex 200 Contractors LMA Silicone - Transparent 295ml 
Timloc Standard Roof Tile Vent Adaptor 
Bond It Bitumen Paint - Black 5L 
Soudal 5 Minute D4 Wood Adhesive Liquid – 750g 
Code 5 Cast Lead - 390mm x 3m 
ALM Code 5 Milled Lead - 360mm x 3m 
Universal Hip Support System Tray - 1.2m 
Soudafoam Gap Filler Genius Gun - 600ml 
Ronseal Hairline Crack Ready Mix Wall Filler - White 330g 
Timco Precision Screwdriver Set 6pcs 
Evercryl Emergency Roof Repair - Clear 310ml (Box of 12) 
Everbuild Pinkgrip SF But It’s White – 380ml (Box of 12) 
ALM Code 4 Milled Lead - 760mm x 6m 
Everbuild 501 PVA - 1 Litre 
Bond It B3 Fill And Fix Expanding Foam Gun Grade - Beige 750ml 
Ronseal Multi Purpose Smooth Finish Filler - 330g 
Timloc 1204 Underfloor Vent Vertical Extension + 150mm 
Timloc Double Roman Tile Vent Brown (Box of 6) 
Ronseal Exterior Yacht Varnish - Satin 250ml 
Uses
The Stays White 2in1 Primer and Paint by Ronseals delivers excellent colour and protection, all of this achieved in just two coats. Its unique formula provides a non-drip application, aiding you in preventing unwanted spillages. Another feature that allows this product to stand out from the rest is its resistance to scruffs and scratches.
Preparation
You should prepare the surface correctly to optimise the paint's colour and finish. Sand the surface with 120 grit sandpaper, and wearing a facemask during this is advised to prevent inhaling and dust particles. After you've sanded the surface, you should use white sprit and a cloth to wipe and clean the wood. If any knots are present, you can use a knot blocker if you don't want it to show through the paint.
Application
- Ensure you stir the paint pigments thoroughly in the tin.
- Dip a synthetic brush into the paint and apply it, brushing in the direction of the grain, leaving 4 hours for the first coat to dry.
- After it's dried, apply a second coat in the same fashion as before
- You can touch the second coat in just 30 minutes after application, but it will fully dry in 4 hours.
Aftercare
You'll be able to maintain the wood normally, cleaning as you typically would clean wood. Any damages that may occur can be rectified by sanding the affected area down and applying the over the area.
