ALM Code 7 Milled Lead - 300mm x 3m 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 2.5 Litre 
FloPlast Half Round Internal Stop End, White – 112mm 
Soudal Soudafoam Gap Filler Hand Held 750ml (Box of 12) 
Oxyturbo Oxygen Refill 
FrogTape® Delicate Surface Masking Tape - Yellow 24mm x 41.1m 
ALM Code 4 Milled Lead - 1200mm x 6m 
Cromar Black Bitumen Paint – 2.5 Litre 
ALM Code 6 Milled Lead Flashing - 450mm x 3m 
Soudal Repair Express Plaster - White 290ml 
Everbuild 408 Super Seal - 5 Litre 
Timloc Universal Slate Roof Vent Pipe Adaptor Kit 
Easy-Trim Lead R Flashing Textured – 150mm x 5m 
Everbuild Power Pro Sealant Gun - 290 to 380ml (Box of 12) 
Klober Regent Tile Vent KG6084, Grey 
Leadax Lead Free Flashing Alternative 600mm (6M Rolls) 
OX Pro Tuff 3 Level Kit - 600, 1200 and 1800mm 
Uses
The 10-Year Trade Woodstain is formulated with a professional-level formula, offering up to 6m² per litre coverage with three coats required for optimal protection. It achieves all the protection needed to protect the wood, delivering a vibrant colour that revives your wood, displaying its natural qualities.
Preparation
Before commencing the application, sand the wood down using 120-grit paper, and you should wear a facemask during this process to prevent any unwanted dust from being inhaled. After sanding, clean the surface with white spirit and leave it to dry.
Application
- Stir the wood stain to mix the pigment.
- Using a synthetic brush, apply three coats of the wood stain following the direction of the grain.
- Leave it for 4 hours to dry.
- Before starting the final coat, lightly sand the wood and apply the wood stain again. This will achieve optimal colour and finish.
Aftercare
After completing the application, remove any excess wood stain from your brush using warm, soapy water. Don't not empty any wood stain into watercourses or drains.
