Code 8 Cast Lead - 300mm x 6m 
Thompson's Emergency Roof Seal - Black 1L 
Everbuild Everflex Mirror Mate Adhesive - White 290ml 
Easy-Trim Lead R Flashing Smooth – 600mm x 5m 
ALM Code 7 Milled Lead - 914mm x 6m 
Samac Half Round Snowguard Bracket - 150mm (6") 
Klober 20K Slate Vent KG9795-0429 Slate Grey 
Ronseal uPVC Paint - Royal Blue Satin 750ml 
Everbuild General Purpose Silicone - Clear 280ml (Box of 12) 
Everbuild Black Jack 908 DPM – 25 Litre 
Everbuild Opti-Mix Mortar Plasticiser - 1 Litre (Box of 12) 
Code 6 Cast Lead - 240mm x 6m 
Left Hand Klober Contract Dry Verge Unit Brown 
Klober Thin Line Vent - Black KG9855-3-0450 (Box of 10) 
Everbuild ASBO Graffiti Remover - 400ml 
Azpects EASYSeal Sandstone Enhancer and Sealer 5L 
ALM Code 5 Milled Lead - 1600mm x 6m 
Klober Small Slate Vent - Slate Grey 
Ronseal One Coat Stays White Radiator Paint - Gloss 750ml 
Timco Self-Drilling Wing-Tip Metal Construction Screw 
OX Pro Brick Trowel Philadelphia Pattern - 10"/250mm 
Everbuild Mammoth Barrier Tape - Red/White (72mm x 500m) 
Uses
The Trade Polyurethane Hardglaze Varnish by Ronseal offers your interior wood the highest level of protection. With its trade tier quality, this product is only used by those seeking the best results. Perfect for all types of wood found in the interior. However, this product is unsuitable for application onto wooden floors.
Preparation
Sand the surface of the wood down using 120-grit paper. It's advised to wear a mask in this process to avoid inhaling dust particles. After you've sanded the surface, wipe it down with white spirit and let it dry.
Application
- Stir the tin thoroughly to mix the paint.
- Using a brush, apply a coat onto the wood following the direction of the grain.
- Leave 6 hours for the layer of paint to dry, then apply a second coat.
- Before applying the 3rd and final coat, you should slightly sand the surface down. It will optimise the last coat and presents the best quality finish.
Aftercare
Any leftover varnish on your brush can be washed off using white spirit. Don't let any of the leftover varnishes go down into the drain or watercourses.
