FloPlast Half Round Pipe Socket, Brown 
Bulk pallet 125 packs - Classic Multi-Purpose Screws 4.0 x 50 Double Countersunk - A2 Stainless Steel - 200 Box 
Code 6 Cast Lead - 600mm x 3m 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 5 Litre 
ALM Code 8 Milled Lead - 180mm x 6m 
Ronseal Fence Life Brush - 4" 
Ronseal Exterior All Surface Primer & Undercoat - White 750ml 
Code 5 Cast Lead - 210mm x 6m 
ALM Code 3 Milled Lead - 914mm x 6m 
Everflex Premium+ 450 Builders Silicone – Grey 300ml (Box of 25) 
Samac Stainless Steel Cladding Pins - 30mm x 2.0mm (Box of 250) 
Lead Sheet Restorer - G3 
Ronseal Ultimate Finish Interior Floor Pad Kit 
Sika MultiSeal Self Adhesive Bituminous Sealing Tape - (300mm x 10m) 
Everbuild Flue Jointing Compound - 1kg 
Bond It Patio Blaster - Clear 5L 
Soudal Roof & Gutter Sealant – Black 290ml 
Oxyturbo Oxygen Refill 
Samac Aluminium Clout Nails - 50mm x 3.35mm 10kg Box 
FloPlast Half Round Running Outlet, White 
Code 7 Cast Lead - 850mm x 6m 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Brown (Box of 5) 
Soudal Trade Gun Grade Expanding Foam - 750ml (Box of 12) 
Everbuild Lumberjack 30 Minute Polyurethane Wood Adhesive Liquid – 750ml 
ALM Code 7 Milled Lead - 240mm x 6m 
OX Tools Pro Heavy Duty Flexi Tub - 42L 
Ronseal Precision Finish Brush - 3 Pack 
Uses
The uPVC paint by Ronseals offers windows and doors that are made from uPVC another life. With it's long-lasting, durable formula, you only need to apply 2-3 coats to achieve the best results! Suitable for application with a brush, roller or spray, you can expect to cover up to 6.5m² per litre.
Preparation
Preparing for the application of this product requires several steps. First, you need to ensure the day that you're applying it is above 10°C, and this is because it can affect the drying times. Prepare the surface by washing it with warm, soapy water, leave it to dry thoroughly, observe the uPVC and complete any required remedial work. If the uPVC has previously had paint on it, which is still in good condition, give it a light, even sand. If it's fresh uPVC, lightly sand it to give it an even finish, using 180-220 grit sandpaper. If any cracks or flakes are on the surface, you need to sand it all off. Clean any dust, dirt or other contaminants lying around afterwards.
Application
- Thoroughly stir the paint, mixing all the pigments
- Using either a brush, roller or spray, apply the first coat and then leave it to dry for 2-4 hours.
- If the base colour of the uPVC is dark, you may require a third coat.
- Please note that the first coat will provide a waterproof layer and typically activates after an hour.
Aftercare
You should check it annually to ensure your uPVC is kept to a high standard. If you notice any blisters, scratches or cracks, sand it off and touch it with two coats. Clean your tools with warm, soapy water, and don't empty any leftover paint into drains or watercourses.
