FloPlast Half Round Internal Stop End, White – 112mm 
Code 8 Cast Lead - 150mm x 6m 
Ronseal 3 in 1 Basecoat - White 2.5L 
Soudal Pro 30D Waterproof Wood Adhesive - 750g 
Ronseal Stays White Ultra Tough White Satin Paint - 750ml 
Everbuild Everflex AquaMate Aquarium Sealant – Translucent 295ml (Box of 12) 
OX Heavy Duty Soft Gel Filled Knee Pad 
Timco Lithium EP2 Grease - 400g 
Freeflow Square Gutter System Internal Stopend - White 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Slate Grey (Box of 5) 
Cromar Vent 3 Light Breathable Membrane - 1m x 25m 
ALM Code 7 Milled Lead - 800mm x 6m 
FloPlast Half Round Fascia Bracket, White – 112mm 
Everbuild Mitre Fast Industrial Kit Superglue (Box of 24) 
Colron Refined Finishing Wax - 325g 
Everbuild Industrial Superglue HV – Clear 20g 
ALM Code 8 Milled Lead - 210mm x 3m 
Ronseal Knot Block Primer & Undercoat - White 2.5L 
Everbuild Gun A Nail Standard – White 310ml 
ALM Code 4 Milled Lead - 1200mm x 3m 
Code 4 Cast Lead - 1200mm x 3m 
Ronseal Exterior Yacht Varnish - Gloss 1L 
Everbuild External Frame Sealant - Stone 290ml (Box of 12) 
Ulti-Mate Stonewold Mk2 Roof Tile Vent - Grey 
Everbuild Stixall Extreme Power - Brown 290ml (Box of 12) 
ALM Code 3 Milled Lead - 210mm x 6m 
Ronseal Wet Rot Wood Hardener - 750ml 
Uses
Wet Rot Wood Hardener by Ronseal's is perfect for combating wet rot eating away at your wood. Suitable to be used inside and outside, Ronseal formulated this product to produce robust prevention of wet rot, leaving a rock hard finish that creates a perfect base for filling cracks and holes. Applied through a brush, it only takes one coat to achieve the full results.
Preparation
You should wear appropriate protective clothing to prevent wet rot hardeners from getting on your clothes or skin. If you are applying this product internally, open the doors and windows to increase the ventilation. Remove any loose or crumbling wood and ensure the application area is dry. To achieve optimal results, drill small holes into the wood; this allows the hardener to reach deeper into the wood.
Application
- Shake the tin thoroughly
- Pour a small amount into the plastic lid
- Apply the solution directly to the affected area using a paintbrush, ensuring it soaks deep into the rotten wood.
- Give it 2 hours to dry, then scrub with a wire brush to remove any excess hardener.
Aftercare
After you've completed the application, you can repair any cracks or holes in the wood using an appropriate wood filler. You can use white spirit to clean any tools you may have used.
