Bond It A43 Threadlock Oil Tolerant Adhesive - 50ml Blue 
20 x Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit 
FloPlast Half Round Gutter 90° Bend, Brown – 112mm 
Timco Heavy Duty Tarpaulin - 4m x 5m 
Timloc Mini Castellated Tile Vent Brown (Box of 14) 
Everbuild Black Jack 904 Roof Felt Adhesive – 1 Litre 
Everbuild KOS Fire Cement Buff – 1kg 
Everbuild Stixall Extreme Power – White 290ml 
Bond It Aerosol Spray Adhesive - 500ml Beige 
Klober Univeral Angle Ridge End - Grey 
FloPlast Half Round Fascia Bracket, Black – 112mm 
ALM Code 7 Milled Lead - 510mm x 3m 
Bond It Pro-Mate LMA Silicone - Translucent EU3 
Everbuild 501 PVA - 2.5 Litre 
Ronseal One Coat Stays White Radiator Paint - Gloss 750ml 
Everbuild P13 Plumbers Putty - Beige 750g 
Ronseal Diamond Hard Floor Varnish - Clear Matt 2.5L 
ALM Code 6 Milled Lead Flashing - 300mm x 6m 
Everbuild Bath & Kitchen Sealant - 200ml 
Timco Lithium EP2 Grease - 400g 
Everbuild KOS Fire Cement Buff – 2kg 
Code 8 Cast Lead - 240mm x 3m 
Code 7 Cast Lead - 300mm x 3m 
Cromar Bitumen Trowel Mastic - Black 2.5L 
Everbuild Everflex Contract 700T LMN Silicone - Bronze (Box of 25) 
Uses
The Waterproof PVA by SikaBond is the ultimate, high-quality admixture that delivers exceptional bonding and sealing properties, enhancing water resistance and increasing adhesion. Compared to other waterproof PVA admixtures, the Waterproof PVA by SikaBond sits above the rest on the market because it is easy to use and, unlike normal PVA, will not re-emulsify when wet. Applications this product is typically applied in include;
- Excellent for renders or toughening floors and screeds
- Waterproofs PVA adhesive and admixture, which seals, primes, toughens and waterproofs
- Suitable for brickwork, mortar, render, screed and plaster.
Preparation
Ensure the application surface is sound, stable and free from contaminants that can interfere with this product, including dirt, dust, grease, oil, standing water, cracked or loose materials, etc.
Application
- Shake the bottle well before using
- Apply directly to the surface using a brush or roller
Alternatively;
- Pour it directly into a cement admixture
- The quantity for dilution depends on the surface porosity.
- Allow primer to dry before laying bonding coats (for non-absorbent surfaces, the sealer coat may be omitted)
- Apply the cement screed, render or plaster while the bonding coat is still tacky.
Limitations and Notes
- Do not apply this product below 10°C
- Do not use it on surface if rain is imminent, as it'll wash it off
