Soudal Grab Solvent Based Adhesive, Beige 
OX Pro Impact Bit Set - 31 Piece 
BORA Centipede 4ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Bond It Dec-Mate Flexible Filler - Magnolia EU3 
Everbuild Pinkgrip Dryfix FR – 750ml 
Code 6 Cast Lead - 510mm x 3m 
20 x Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit 
Hambleside Danelaw Felt Lap Vent 
OX Tools OX Pro Aluminium Kevlar Chalk Line Reel and Refill 
Bond It Rain-Mate All Weather Sealant - Black EU3 
Cromar Vent 3 Pro Breathable Membrane 1m x 50m 
Soudafoam Gap Filler Gun Grade – 750ml 
Permavent Easy Slate 500 - Box of 100 
Code 4 Cast Lead - 180mm x 3m 
Timco Collated Drywall Self Drilling Screws 
ALM Code 5 Milled Lead - 150mm x 3m 
Siroflex Trade Superglue Activator Spray - 400ml 
Code 7 Cast Lead - 800mm x 3m 
Ronseal Stays White One Coat Non-Drip Paint - Satin 2.5L 
Hambleside Danelaw TV15/7 Tile Vent - Black (Box of 5) 
Ox Tools OX Pro Heavy Duty Sealant Gun - 290ml to 400ml 
Colron Liquid Scratch Cover - Light 14ml 
Everflex Contract AC95 Intumescent Sealant & Adhesive - White 900ml (Box of 12) 
Soudal Fix ALL High Tack Hybrid Sealant - Invisible 290ml 
Everbuild Anchorset Green 150 - Grey 150ml 
Uses
The Waterproof PVA by SikaBond is the ultimate, high-quality admixture that delivers exceptional bonding and sealing properties, enhancing water resistance and increasing adhesion. Compared to other waterproof PVA admixtures, the Waterproof PVA by SikaBond sits above the rest on the market because it is easy to use and, unlike normal PVA, will not re-emulsify when wet. Applications this product is typically applied in include;
- Excellent for renders or toughening floors and screeds
- Waterproofs PVA adhesive and admixture, which seals, primes, toughens and waterproofs
- Suitable for brickwork, mortar, render, screed and plaster.
Preparation
Ensure the application surface is sound, stable and free from contaminants that can interfere with this product, including dirt, dust, grease, oil, standing water, cracked or loose materials, etc.
Application
- Shake the bottle well before using
- Apply directly to the surface using a brush or roller
Alternatively;
- Pour it directly into a cement admixture
- The quantity for dilution depends on the surface porosity.
- Allow primer to dry before laying bonding coats (for non-absorbent surfaces, the sealer coat may be omitted)
- Apply the cement screed, render or plaster while the bonding coat is still tacky.
Limitations and Notes
- Do not apply this product below 10°C
- Do not use it on surface if rain is imminent, as it'll wash it off
