Code 6 Cast Lead - 800mm x 6m 
ALM Code 6 Milled Lead Flashing - 760mm x 6m 
Lead Sheet Cleaner - 1 Litre 
Code 5 Cast Lead - 760mm x 6m 
OX Tools 12 inch / 300mm Pro Stainless Steel Plasterers Mud Pan 
Timloc Castellated Tile Vent Terracotta (Box of 8) 
Code 4 Cast Lead - 760mm x 6m 
FreeFlow Round Gutter System Stopend External - Black 
Everbuild Resiblock Block Paving Sealer - Matt 5 Litre 
Soudal 140 LQ Contact Adhesive – 5 Litre 
Everbuild General Purpose Silicone - Grey 280ml (Box of 12) 
Soudal Glass and Mirror Cleaner - 1 Litre 
Everbuild Mitre Fast Industrial Kit Superglue (Box of 24) 
Everbuild PVCu Acti-Spray – Clear 200ml 
Everbuild Stixall Extreme Power - Clear 290ml (Box of 12) 
FloPlast Half Round Fascia Bracket, Black – 112mm 
IKO Easymelt Bonding Bitumen Keg - 10kg 
Bond It Indian Stone Sealer - Clear 5L 
Everbuild Black Jack 905 All Weather Roof Coating – 25 Litre 
Code 7 Cast Lead - 150mm x 6m 
FloPlast Round Shoe - White 
Ronseal Trade 10Yr Woodstain Satin Walnut 750ml Brown 
OB41 Multi-Use Brake Cleaner - 400ml 
ALM Code 7 Milled Lead - 760mm x 3m 
Siroflex Painters Caulk-It - 380ml 
ALM Code 8 Milled Lead - 1000mm x 3m 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Black (Box of 5) 
Siroflex Trade Strength Glass Cleaner - 1L 
Uses
The 112 Mortar & Brick Cleaner by Sikagard offers excellent assistance in removing and restoring mortar, bricks and similar substrates. It is formulated with water and hydrochloric acid, offering a solvent-free alternative to traditional brick-and-mortar cleaners.
Preparation
Prepare the area by pre-wetting it with clean water before application. If you want to immerse products into the solution to clean them, use an acid-proof container diluting the solution 1 part 112 Mortar & Brick cleaner to 1 part fresh water.
Application
Immersion:
As mentioned above in the preparation, properly dilute 1 part 112 Mortar & Brick cleaner to 1 part freshwater, submersing the object into a bucket of the solution until the concrete is removed, then rinse with clean water.
Brush:
Do not work on more than 1m² at a time when applying via brush. Leave the solution on the concrete until it's removed the contaminants and wash it down with fresh water to neutralise it.
Limitations
- Due to the aggressiveness of this product, it can attack the colour in paving and blocks, so ensure you carry out a preliminary test prior to completing the entire project.
- Take care in using internally with artificial stone.
- Always wash the surface down after treating it.
- Prevent contact with plants and animals when using this product.
- Surfaces that are sensitive should have a more diluted solution. Use the mixture 1:2 (cleaner to water)
