Ronseal Knot Block Primer & Undercoat - White 2.5L 
Everbuild Easi-Squeeze Flexible Decorators Filler - White 200ml 
Freeflow Square Gutter System Running Outlet - White 
Everbuild Stick2 Industrial Superglue HV – Clear 50g (Box of 25) 
Code 8 Cast Lead - 210mm x 3m 
Hedgehog Gutter Brush Leaf Guard White – 4m x 100mm 
Timloc Multi Stepped Duct Adaptor (Fits 100/110/125/150mm Duct) 
Soudal Parquet & Timber Sealant - Dark Grey 290ml 
Ronseal Precision Finish Brush - 0.5 Inch 
Klober Single Pantile Vent - Terracotta KG9860-0152 (Box of 10) 
ALM Code 6 Milled Lead Flashing - 300mm x 3m 
Ronseal Anti-Bacterial Worktop Oil - Clear 1L 
Colron Liquid Scratch Cover - Medium 14ml 
ALM Code 4 Milled Lead - 180mm x 3m 
Soudal Cartridge Gun Heavy Duty - Black 310ml 
FloPlast Square Line Pipe Connector White 
ALM Code 8 Milled Lead - 914mm x 6m 
OX Pro Aluminium Metric Rafters Square - 180mm 
Code 5 Cast Lead - 600mm x 6m 
Everbuild Salt-Away Salt Remover – 5 Litre 
Soudal Gun & Foam Cleaner Gun Grade - 500ml 
Timloc 1204 Underfloor Vent Vertical Extension + 150mm 
Timco Square Twist Nails - Galvanised (40 x 3.75mm) 1kg 
OX Pro Brick Carrier 
FrogTape® Delicate Surface Masking Tape - Yellow 24mm x 41.1m 
Gorilla Wood Glue - Brown 1L 
Uses
30 Min D4 Gel Pu Wood Adhesive Trade by Soudal is a perfect, well-rounded adhesive that enables various applications most other products struggle with. One of these includes the filling characteristic; the foam formation created by this product allows for uneven surfaces to be bonded effectively. This product has fantastic resilience to water, offering applications externally as well as high humidity. This product can bond windows and door frames, including the corner connection.
Preparation
Before commencing the application, prepare the surface by removing any contaminants that can hinder the adhesion. These include dirt, dust, oil, grease and similar impurities. This product doesn't need a primer; however, spraying the surface with a bit of water is suggested. This is due to the adhesive curing when exposed to moisture in the air and will optimise the application.
Application
- Cut the top of the cartridge, being careful not to damage the threaded screw.
- Screw the nozzle onto the cartridge, cutting it at a 45° angle.
- Apply using a standard sealant gun, and apply the adhesive onto one of the surfaces to be bonded.
- Bring the two surfaces together and clamp within 30 minutes of application for at least 3 hours to achieve the maximum possible strength.
