Thompson's Water Seal - 1L 
Bond It Bath Mate Bath & Kitchen Sealant - White EU3 Box of 25 
Bond It Silicone Ultra Waterseal - Clear 5L 
ALM Code 5 Milled Lead - 210mm x 3m 
Code 4 Cast Lead - 600mm x 3m 
Easy-Trim Lead R Flashing Textured – 450mm x 5m 
Timloc 1206 Underfloor Vent Horizontal Rear Extension + 100mm 
Bond It Power Proof Concentrated Waterproof Render Admixture - 1 Litre 
OX Pro Impact Bit Set - 11 Piece 
Everbuild Stixall Extreme Power – Brown 290ml 
Everbuild Aquaseal Liquid Roof – Slate Grey 21kg 
20 Boxes x Extra Large Head Clout Nails, Galvanised 
Klober Adaptor For 20K Vents - KG979700 
Bond It Multi-Purpose Powder Filler - White 450g 
Timco Square Twist Nails - Galvanised (40 x 3.75mm) 1kg 
OX Tools 12 inch / 300mm Pro Stainless Steel Plasterers Mud Pan 
Code 3 Cast Lead - 1600mm x 6m 
Ronseal Exterior Yacht Varnish - Gloss 2.5L 
Bond It Mould Stop - Clear 2.5L 
Klober Double Roman Roof Tile Vent - Brown KG9857-3-0247 (Box of 10) 
Uses
30 Min D4 Liquid Pu Wood Adhesive Trade by Soudal is a perfect, well-rounded adhesive that enables various applications most other products struggle with. One of these includes the filling characteristic; the foam formation created by this product allows for uneven surfaces to be bonded effectively. This product has fantastic resilience to water, offering applications externally as well as high humidity. This product can bond windows and door frames, including the corner connection.
Preparation
Before commencing the application, prepare the surface by removing any contaminants that can hinder the adhesion. These include dirt, dust, oil, grease and similar impurities. This product doesn't need a primer; however, spraying the surface with a bit of water is suggested. This is due to the adhesive curing when exposed to moisture in the air and will optimise the application.
Application
- Apply the adhesive using a fine-tooth comb or brush, and apply it to one of the materials to be bonded
- Bring the two surfaces together within a maximum of 15 minutes and clamp them down for at least 3 hours
- If you don't clamp it down, you'll risk from poor adhesive results
