Bond It The Beast PU Adhesive - Brown 500ml 
Timloc Double Pantile Tile Vent Grey (Box of 6) 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Antique Red (Box of 5) 
Timco Screwdriver 6-Tool Set 
Everbuild Jetcem Rapid Repair Cement – 6kg 
Hambleside Danelaw TV15/7 Tile Vent - Black (Box of 5) 
Everbuild Pro Blue Masking Tape - 25mm x 33mm 
Evercryl Emergency Roof Repair - Clear 310ml 
FloPlast Round 92½° Bend - Brown 
Soudal Silicone Sealant Remover, Clear - 100ml 
Soudal 30 Min D4 Gel PU Wood Adhesive Trade - 290ml 
Chesterfelt Polyester Reinforced Shed Roofing Felt - Charcoal 10m x 1m 
Ronseal Multi Purpose Filler Smooth Finish Powder - 2Kg 
Weather Guard Poly-Tarpaulin 
Everbuild Febond PVA - 5L 
Timco Assorted Horseshoe Shims - 1.0 to 6.0mm (Box of 200) 
Everbuild Black Jack 901 Black Bitumen Paint – 25 Litre 
Code 5 Cast Lead - 210mm x 6m 
Easy-Trim Lead R Flashing Smooth – 600mm x 5m 
ERidge Dry Fix Ridge System Black – 6m Kit 
IKO Super Shed Felt - Green 8m Roll 
Armatool Leather Belt Black, Large 
Timloc Castellated Tile Vent Red (Box of 8) 
Soudal Orange Skeleton Gun - Up to 310ml 
Uses
The B1 Trade Expanding Foam by Soudal is an excellent expanding foam, ideal for various applications throughout a building. It's ideal for installing windows and door frames, general cavity filling, and sealing openings in roof construction. It improves thermal isolation in cooling systems and is an excellent versatile gap filler. It offers outstanding adhesion to all surfaces, excluding PE, PP and PTFE.
Preparation
Due to its excellent adhesion properties, minimal preparation is required. Using a stiff brush to remove small debris is good practice, as it focuses on cleaning any dust, grease, and similar impurities. Afterwards, moisten the surfaces to improve the adhesion, and then you can proceed with the application.
Application
- Shake the aerosol for 20 seconds
- Put the adaptor on the valve
- Fill the cavity up to 1/3, allowing the foam to expand and fill the rest
- Repeat shaking the can regularly as you're applying
- If the cavity hasn't filled entirely and needs another application, allow it to cure and slightly moisten it
- Proceed to apply a second load of expanding foam
Limitations and Notes
- Do not apply this product if the temperature isn't between 5°C and 35°C
- Any cured foam can only be removed mechanically.
