Soudal Fix ALL High Tack – Black 290ml (Box of 12)

Uses

Fix ALL High Tack Hybrid Sealant by Soudal delivers excellent bonding properties in various applications. It has been crafted with a hybrid polymer based on the SMX-Polymer, providing an outstanding, high-strength grab with long-lasting application and resistance to weather and UV light. This product's typical areas of application include;

• Joints in bathrooms and Kitchens.
• Sealing and bonding in the construction industry
• Elastic structural bonding in the motor and container industry
• Elastic bonding of panels, profiles and other pieces on the most common substrates, typically found on a construction site or home.

Preparation

You should prepare the surface before commencing the application; otherwise, you'll not receive the optimal application this product can achieve. Remove any contaminants that can hinder this product's adhesion, including dust, dirt, grease and similar impurities.

Non-porous surfaces should be prepared with an activator or cleaner. Porous surfaces that are in water-loaded applications should be primed before application.

Application

1. Cut the top cartridge, ensuring you do not damage the threaded screw.
2. Screw the nozzle onto the cartridge, and cut it at a 45° angle with an opening slightly larger than the gap to be filled.
3. Using a standard sealant gun, apply a firm, consistent pressure to the gun handle, allowing you to extrude an even consistent bead for optimal adhesion.
4. After applying the sealant, tool down either using an applicator tool, slightly wetted spatula or wooden spoon.

Limitations

• Due to the wide choice of water-based paints, you should test the paint's compatibility before completing the entire project.
• If the application area is plastic or includes plastic in contact with this product, test the compatibility before.
• This product is not suitable to be used as a glazing sealant.
• Do not use this product in the manufacturing of aquariums.
• This product can be applied to stone as an adhesive but is unsuitable as a joint sealant.
• If not kept clean, this product may stimulate organic growth.
• Discolouration may occur if in contact with direct, long UV exposure. This will not hinder its adhesive properties.
• Discolouration and loss of adhesion will occur if this product is used in areas where contact with bitumen, tar or plasticisers releases EPDM, neoprene, butyl, etc.