Siroflex Trade Strength Medium Viscosity Superglue - 20g 
ALM Code 6 Milled Lead Flashing - 360mm x 3m 
Soudal Fix ALL Turbo - Grey 290ml (Box of 12) 
Soudal Construction Silicone, Grey - 290ml (Box of 12) 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 2.5 Litre 
FloPlast Rafter Bracket Top Fix 
Soudal Repair Express Plaster - White 900ml 
Siroflex Trade Superglue Activator Spray - 200ml 
Bostik Brushable Waterproofer - Black 5L 
Everbuild 408 Super Seal - 5 Litre 
OX Pro Brick Carrier 
Code 8 Cast Lead - 914mm x 6m 
Everbuild Weather Mate Gap Filler & Adhesive - Black 295ml (Box of 25) 
Soudal Trade Roof & Insulation Expanding Foam Genius - 600ml (Box of 12) 
Freeflow 68mm Round Down Pipe Shoe - White 
Ronseal Crystal Clear Outdoor Varnish - Satin 2.5L 
Timloc 1204 Underfloor Vent Vertical Extension + 150mm 
Code 7 Cast Lead - 800mm x 3m 
Timco Straight Tower Bolt Black 6" Gate Bolt 
ALM Code 3 Milled Lead - 150mm x 6m 
Soudal PVCu Gap Filler, White - 300ml (Box of 12) 
Everbuild Maximum Torque - White 290ml (Box of 12) 
Uses
The Genius Gun Trade Gap Filler Foam by Soudal is an excellent gap-filling polyurethane expanding foam that provides fantastic stability with no shrinkage or post-expansion. Its filling capacity is fantastic, providing up to 22 litres of foam stored in a convenient and economical 600ml aerosol can. It's formulated to be elastic and compressible and has great insulation value, including thermal and acoustic. It adheres well to various substrates, showing versatility in the product.
Preparation
Before commencing the application, to ensure optimal adhesion and performance are achieved, clean the surface, wiping away all contaminants that can interfere with the adhesion. These include dirt, dust, grease, oil, organic growth, loose debris and flaking material.
Application
- Shake the aerosol thoroughly for at least 20 seconds and regularly shake it throughout the application.
- Open the cover and fold the tube perpendicular to the aerosol can.
- Using a spray bottle, slightly moisten the surface to enhance the adhesion and curing of the foam.
- Fill the gap 1/3 full, then allow the polyurethane expanding foam to fill the rest.
- If you have to work in layers, allow the first to cure, slightly moisten the surface and apply a second layer.
Limitations and Notes
- Any cured expanding foam must be mechanically removed.
- Any uncured expanding foam can be removed using a damp cloth.
