Soudafoam Window & Door Xtra Gun Grade, Champagne - 750ml 
OB41 Silicone Lubricant Spray 400ml 
Klober 15x9 Tile Vent - Brown KG9690-0247 (Box of 10) 
OX Pro 5 Piece Wood Chisel Set in Velcro Case 
OX Pro Tough Bucket, Blue - 15 Litre 
Everbuild Stixall Extreme Power – Clear 290ml 
Everbuild Professional Sealant Gun - C3 (280ml - 310ml) 
Ox Tools Waterproof Latex Gloves Size 9 Large 
ALM Code 5 Milled Lead - 450mm x 6m 
Bond It Power Frost Premium Quality Concentrate Additive - 1L Pale Blue 
Bond It Bitumen Paint - Black 25L 
Bond It Bath Mate Bath & Kitchen Sealant - White EU3 
Samac Aluminium Clout Nails - 55mm x 3.35mm (1kg) 
Everbuild Mammoth Clear Weatherproof Tape 
Everbuild Plumbers PVC Pipe Cement - Clear 250ml 
Klober Regent Tile Vent KG6084, Grey 
FloPlast Square Line External Stop End Black – 114mm 
Soudal Insulating Foam Genius Gun 750ml - Champagne 
Everbuild 502 Wood Adhesive – 1 Litre 
Ronseal One Coat Stays White Radiator Paint - Satin 250ml 
Bond It Paving & Patio Seal - Clear 25L 
Code 7 Cast Lead - 760mm x 6m 
Chesterfelt Polyester Reinforced Shed Roofing Felt - Charcoal 10m x 1m 
Bond It The Beast PU Adhesive - Brown 250ml 
Siroflex Painters Caulk-It - 310ml 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
Uses
The Genius Gun Trade Pipe and Plumbing Foam by Soudal is a fantastic product with excellent stability, filling capacity and adhesion, ensuring that a robust, long-lasting gap-filler is extruded. It's equipped with a patented Genius Gun attachment, allowing direct application from the aerosol with reusability up to 6 weeks from the initial application. It's perfect for pipes, electrical wiring, general cavities and static and non-static joints.
Preparation
Before commencing the application, ensure that all contaminants present are removed, including dirt, dust, grease, oil, organic growth, loose debris, and flaking material. Before applying the expanding foam into the void, slightly moisten the surface to enhance bonding and curing.
Application
- Shake the can thoroughly for at least 20 seconds and repeat it regularly throughout the application.
- Open the cover and pull the folded tube to sit perpendicular to the aerosol can.
- Fill the cavity up to 1/3, and then allow the expanding foam to fill the rest.
- If you have to work in layers, allow the first to cure fully. Afterwards, use the same method as before, slightly moistening the surface.
- Apply the second load directly into the void and over the first layer, filling 1/3 of the cavity and allowing the expanding foam to fill the rest.
Limitation and Notes
- Ensure that the void you intend to fill has been slightly moistened to enhance curing and adhesion.
- Any cured expanding foam can only be removed mechanically.
- Any uncured expanding foam can be wiped away using a damp cloth.
