Bond It Multi-Wipes Spray - Clear 1L 
Code 8 Cast Lead - 800mm x 6m 
Code 5 Cast Lead - 914mm x 3m 
Permavent Easy Slate 500 - Pack of 20 
Everbuild Aquaseal Liquid Roof – Slate Grey 7kg 
Everbuild KOS Fire Cement Buff – 1kg 
ALM Code 6 Milled Lead Flashing- 1000mm x 6m 
Code 6 Cast Lead - 1200mm x 6m 
Timloc Standard Roof Tile Vent Adaptor 
Freeflow Round 112mm Gutter System 135° - Black 
Timco Mixed Hose Clips 
Samac Aluminium Annular Ring Nails - 1kg (38mm x 3.35mm) 
Ox Pro Ultraflex Finishing Trowel - 16" (405mm x 110mm) 
Soudal PVCu Solvent Frame Cleaner - 1L (Box of 12) 
OX Spectrum Trade XL Mortar Raking Diamond Blade 115/22.23mm 
Code 4 Cast Lead - 760mm x 3m 
Bond It Rubber Bitumen Emulsion - Black 5L 
Bond It Mould Stop - Clear 1L 
Timco Metal Cavity Anchors - M5 x 37 (45mm Screw) Pack of 70 
Hambleside Danelaw TV15/4 Tile Vent - Terracotta (Box of 5) 
Bostik Flashband Self Adhesive Flashing Tape – Grey 3.75m x 75mm 
Everbuild Stick2 Industrial Superglue HV – Clear 50g (Box of 25) 
OX Pro 4 In 1 Heavy Duty Staple Gun 
Soudal Compact Foam Gun PU Foam 
Easy-Trim Universal Dry Verge System Black (Box of 50) 
Thompsons One Coat Roof Seal - Black 5L 
Everbuild Superflow Sealant Gun - C3 (290ml - 310ml) 
Thompson's uPVC Restorer - 480ml 
Everflex Premium+ 450 Builders Silicone – Grey 300ml (Box of 25) 
Uses
The Genius Gun Trade Pipe and Plumbing Foam by Soudal is a fantastic product with excellent stability, filling capacity and adhesion, ensuring that a robust, long-lasting gap-filler is extruded. It's equipped with a patented Genius Gun attachment, allowing direct application from the aerosol with reusability up to 6 weeks from the initial application. It's perfect for pipes, electrical wiring, general cavities and static and non-static joints.
Preparation
Before commencing the application, ensure that all contaminants present are removed, including dirt, dust, grease, oil, organic growth, loose debris, and flaking material. Before applying the expanding foam into the void, slightly moisten the surface to enhance bonding and curing.
Application
- Shake the can thoroughly for at least 20 seconds and repeat it regularly throughout the application.
- Open the cover and pull the folded tube to sit perpendicular to the aerosol can.
- Fill the cavity up to 1/3, and then allow the expanding foam to fill the rest.
- If you have to work in layers, allow the first to cure fully. Afterwards, use the same method as before, slightly moistening the surface.
- Apply the second load directly into the void and over the first layer, filling 1/3 of the cavity and allowing the expanding foam to fill the rest.
Limitation and Notes
- Ensure that the void you intend to fill has been slightly moistened to enhance curing and adhesion.
- Any cured expanding foam can only be removed mechanically.
- Any uncured expanding foam can be wiped away using a damp cloth.
