Klober Permo Ultra 120 - 1m x 50m 
ALM Code 5 Milled Lead - 450mm x 6m 
Easy-Trim Ridge F Universal 6m Dry Ridge Kit - Pallet of 84 + FREE DeWalt XR Combi Drill + Impact Twin Pack 
ALM Code 6 Milled Lead Flashing - 210mm x 6m 
ALM Code 4 Milled Lead - 914mm x 6m 
Bond It Cyanoacrylate Superglue Hi Viscosity - Clear 20g 
FloPlast Downpipe Rainwater Diverter Kit RVS1 
Gorilla Contact Adhesive Tube - Clear 75g 
Everbuild Mammoth Packaging Tape - 48mm x 50m 
Code 7 Cast Lead - 1200mm x 3m 
Soudal Trade All Weather Sealant - Clear 290ml 
FloPlast Half Round Running Outlet, Black 
Ronseal Anti-Condensation Paint - White 2.5L 
Bond It Monster Water Resistant Tape - 48mm x 11m (Black) 
Code 6 Cast Lead - 180mm x 3m 
Code 4 Cast Lead - 914mm x 3m 
Soudal Fix ALL Flexi – White 290ml (Box of 12) 
Code 8 Cast Lead - 800mm x 3m 
Soudal B1 Fire Class Expanding Foam Handheld - 750ml 
OX Pro Magnetic Level 600mm 
Timloc InvisiWeep Extension Tube - 500mm Clear 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Black (Box of 5) 
Uses
The Genius Gun Soudafoam Window and Door by Soudal is an excellent polyurethane expanding foam that provides fantastic gap-filling and insulation benefits. Its fantastic insulation and thermal and acoustic properties are unmatched, putting this product at the forefront when installing windows and indoors. Areas in which this product is typically used include general foam applications, both static and non-static joints. Also, installation of windows and doors, filling cavities, sealing openings in roof construction and creating a sound and thermal barrier.
Preparation
Ensure that all surfaces that this product will contact are free from dirt, dust, grease, oil and similar contaminants that can interfere with the adhesion. All surfaces that this product will contact also need to be moistened with water to enhance curing and adhesion.
Application
- Shake the can thoroughly for about 20 seconds
- Open the cover and pull the folded tube to sit perpendicular to the aerosol
- Apply the polyurethane foam to the area, filling 1/3 of it and allowing the expanding foam to fill the rest
- If you have to work in layers, allow the first to cure, slightly moisten the surface and apply your second layer.
Limitations and Notes
- All surfaces that this product will contact must be slightly moistened
- Ensure you clean all uncured PU foam from the gun after each use. If you don't, you'll not be able to reuse the product
- This product can be reused for up to 6 months from first use.
