ALM Code 8 Milled Lead - 150mm x 6m 
Soudal Neoprene Contact Adhesive Liquid Glue 44A – 50ml 
Everbuild Febond PVA - 1L 
Stanley Heavy-Duty Scraper - 75mm 
Siroflex Trade High Viscosity Superglue - 20g 
Everbuild Tecnic Foil Pack Gun 
Bulk Pallet 50 Packs of Aluminium Clout Nails, 50 x 3.35 - 10KG (500kg) 
Everbuild Wet Rot Wood Hardener – 250ml 
ALM Code 5 Milled Lead - 914mm x 3m 
Code 3 Cast Lead - 850mm x 3m 
Soudal Soudabond 265 Classic Spray - 500ml 
Timco Metal Cavity Anchors - M5 x 37 (45mm Screw) Pack of 70 
Gorilla Tape - Black (48mm x 32m) 
Timloc Double Pantile Tile Vent Grey (Box of 6) 
Everbuild Forever Ivory Silicone Sealant – 295ml 
FloPlast Square Line Internal Stop End Black – 114mm 
Bond It Rain-Mate All Weather Sealant Black EU3 - Box of 12 
Klober Thin Line Vent - Black KG9855-3-0450 (Box of 10) 
Uses
The Mitre Bonding Kit Superglue Adhesive & Activator by Soudal is an outstanding, high-strength, rapid-curing glue perfect for various horizontal and vertical surfaces. This is achieved through the two-component system, which includes a cyanoacrylate adhesive and an activator. When used in conjunction with one another, this product increases the adhesive's performance and reduces curing times significantly.
Preparation
This product only requires a little preparation, but it's essential to complete it to ensure optimal results are achieved. Ensure all surfaces to be bonded are free from dust and grease.
Application
- Spray one of the surfaces with the activator and apply the adhesive to the other.
- Bring both surfaces together and press for at least one minute to allow it to cure fully.
Limitations and Notes
- After using the products, clean the nozzle to ensure no glue cures inside, and you can re-use it.
- You may use the adhesive without the activator, but curing times will be significantly longer.
