Premium Flashpoint Lead Sealant - Grey 
Timloc Double Roman Tile Vent Terracotta (Box of 6) 
Everbuild Pinkgrip Adhesive Solvent Based – 350ml 
Timco High Visibility Wet Paint Tape 
ALM Code 7 Milled Lead - 1000mm x 6m 
Everbuild Multi-Use Wonder Wipes Tub (Box of 12) 
Everbuild Stick2 Rapid Epoxy Tube (2 x 12ml) 
Timloc Over Fascia Vent - 1m 
Cromar Roofing Felt Adhesive - Black 5 Litre 
Code 8 Cast Lead - 600mm x 3m 
ALM Code 4 Milled Lead - 180mm x 3m 
Cromar All Weather Roof Coat – Black 2.5 Litre 
Ronseal Super Flexible Smooth Finish Filler - 300ml 
Ronseal Stays White Ultra Tough White Matt Paint - 2.5L 
ALM Code 3 Milled Lead - 760mm x 3m 
Siroflex Trade Superglue Activator Spray - 200ml 
OX Trade 4 Piece Spirit Level Set - 230, 600, 1200 & 1800mm 
Bond It Cover-It Hardfloor & Glass Protector - Blue 625mm X 50M 
Everbuild 503 SBR Bond – 2.5 Litre 
Everbuild All Purpose Wallpaper Paste (Hangs 30 Rolls) 
Uses
The Mitre Bonding Kit Superglue Adhesive & Activator by Soudal is an outstanding, high-strength, rapid-curing glue perfect for various horizontal and vertical surfaces. This is achieved through the two-component system, which includes a cyanoacrylate adhesive and an activator. When used in conjunction with one another, this product increases the adhesive's performance and reduces curing times significantly.
Preparation
This product only requires a little preparation, but it's essential to complete it to ensure optimal results are achieved. Ensure all surfaces to be bonded are free from dust and grease.
Application
- Spray one of the surfaces with the activator and apply the adhesive to the other.
- Bring both surfaces together and press for at least one minute to allow it to cure fully.
Limitations and Notes
- After using the products, clean the nozzle to ensure no glue cures inside, and you can re-use it.
- You may use the adhesive without the activator, but curing times will be significantly longer.
