Everbuild Showerproof Bathroom Silicone – White 280ml (Box of 12) 
Timco Metal Galvanised Insulation Discs - 35mm 
OX Pro Harling Trowel - 165mm X 165mm 
SikaBond MS Wood Floor Gun Grade - Parquet Brown 600ml 
Gorilla Glue - Dark Brown 60ml 
ALM Code 6 Milled Lead Flashing - 600mm x 6m 
Timco FirmaHold Brad Austenitic Stainless Steel Nails - 16G x 50mm (Qty 2000) 
Bond It Rubber Bitumen Emulsion - Black 2.5L 
Everbuild Forever Ivory Silicone Sealant – 295ml 
ALM Code 7 Milled Lead - 300mm x 3m 
Code 6 Cast Lead - 850mm x 6m 
OX Tuff Carbon Marking Pencil Value Pack 
Sikabond PVA - White 5 Litre 
Ronseal Kitchen & Bathroom Touch-Up Enamel - 10ml 
Bond It All Weather Roofing Compound - Black 25L 
Bond It Flash-Mate Lead Sealant - Grey EU3 
Everbuild Everflex 200 Contractors LMA Silicone - Transparent 295ml (Box of 25) 
Everflex Premium+ 450 Builders Silicone – Oak 300ml (Box of 25) 
Everbuild Pinkgrip Adhesive Solvent Based – 350ml 
Uses
Pro 45P Superfast Wood Glue is excellent for use as a wood glue. This product has remarkable resilience to high humidity, water and general weathering. Perfect for bonding windows and door frames, this product also works well in corner connections, which is required to meet class D4 according to EN204.
Preparation
This product doesn't require any initial priming before the application. However, you must prepare the surface to achieve optimal adhesion. Complete this by removing contaminants such as dirt, dust, oil, grease and similar impurities.
The way the bonding properties of this product work is through the moisture in the air. Therefore, if you lightly spray the surface with water, it will accelerate the curing speed.
This product will bond to most surfaces, such as wood, concrete, stone and other common construction materials. Still, some plastics, such as PE, PTFE and PP, won't be compatible.
Application
- Apply the adhesive to one of the surfaces using a fine-toothed comb or brush to spread the glue.
- Bring the two surfaces together within 5 minutes and clamp the surfaces together. It will take around 30 minutes for this product to cure fully.
