201 Mortar Admix – 5 Litre 
ALM Code 8 Milled Lead - 180mm x 6m 
Klober Thin Line Vent - Slate Grey KG9855-3-0429 (Box of 10) 
Ronseal 6 Year Anti Mould Paint - White Matt 2.5L 
Bond It Contractors PVA - 2.5L White 
ALM Code 5 Milled Lead - 510mm x 3m 
Code 3 Cast Lead - 180mm x 3m 
ALM Code 7 Milled Lead - 600mm x 3m 
Everbuild Safer Spirit - 750ml 
Code 6 Cast Lead - 800mm x 6m 
SikaBond MS Wood Floor Gun Grade - Parquet Brown 600ml 
ALM Code 6 Milled Lead Flashing - 180mm x 6m 
Code 5 Cast Lead - 180mm x 3m 
ALM Code 4 Milled Lead - 1600mm x 3m 
Code 8 Cast Lead - 1000mm x 6m 
Ronseal One Coat Stays White Radiator Paint - Satin 750ml 
DeWalt FLEXTORQ Set PZ2 + Drive Guide in Small Bulk Storage Case 
Klober Small Slate Vent - Slate Grey 
Soudal Handheld Gap Filler Expanding Foam - Champagne 750ml 
Bond It Mega Stik PU Adhesive - Beige 750ml 
ALM Code 3 Milled Lead - 510mm x 6m 
OX Polyzipâ„¢ Flex C1 Cutter - 15mm to 28mm 
Bond It Contractors PVA - 1L White 
Uses
Trade PU Construction Adhesive is perfect for both internal and external applications, and this is due to its resilience to both high humidity and weathering. It has excellent adhesion to wood and various construction materials, allowing the application of bonding window and door frames, even the corner connection, adhering to the EN204 requirements. Some of the surfaces this product can attach to include;
- MDF
- Wood
- Chipboard
- Concrete
- Metal
- Stone
- Plastics
- PU Foam
- Polystyrene Foam
- Mineral Wool
Preparation
Prepare the surface before commencing the application, and remove any contaminants that can hinder the adhesion of this product; this includes dirt, dust, oil, grease and similar impurities. This product achieves complete curing by exposure to the moisture in the air. You should slightly moisten the surface to optimise the adhesion; this also causes foam formation, enabling uneven surfaces to bond.
Application
- Cut the top of the cartridge, ensuring you do not damage the threaded screw.
- Screw the nozzle onto the cartridge and cut it at a 45° angle.
- Apply to the surface using a standard sealant gun on one of the two surfaces.
- Bring the two surfaces together within 5 minutes of application, and clamp for at least 15 minutes to achieve maximum strength.
Limitations
- This product is not suitable for application areas that are constantly immersed in water
- This product is unsuitable for PE, PP, PA, EPDM and Teflon
