Ronseal Expanding Foam Filler - 300ml 
Over Fascia Vent, 10mm 
OX Pro Rodless Sealant Gun - Up to 400ml 
ALM Code 8 Milled Lead - 150mm x 6m 
FloPlast Half Round Running Outlet, White 
Everbuild Everflex 200 Contractors LMA Silicone - Transparent 295ml 
Everbuild Power Pro Sealant Gun - 290 to 380ml (Box of 12) 
Kwik Flash Lead Tool - Turn In Setting Tool For Lead & Zinc Flashing 
ALM Code 7 Milled Lead - 1000mm x 3m 
Siroflex Contractors Lead Sheet Silicone - Grey 300ml 
Code 4 Cast Lead - 150mm x 3m 
Code 3 Cast Lead - 450mm x 6m 
ALM Code 4 Milled Lead - 150mm x 6m 
Ulti-Mate 110/110mm Flexipipe 
Everbuild 405 Path & Patio Seal – 5 Litre 
Timco Twin-Cut C2 Floor-Fix Screws - 4.2mm x 55mm (Tub of 250) 
Bond It Monster Wipes - White 75 Wipes 
Bond It Rubber Bitumen Emulsion - Black 25L 
Everflex Premium+ 450 Builders Silicone – White 300ml (Box of 25) 
Code 8 Cast Lead - 180mm x 3m 
Spax Pozi Pz1 Drill Bits - 25mm (Pack of 5) 
Klober Single Pantile Vent - Terracotta KG9860-0152 (Box of 10) 
Soudal Soudatherm Roof 250 - 800ml (Box of 12) 
Soudal Gap Filler Expanding Foam Genius Gun 300ml - Champagne (Box of 12) 
Uses
The Trade Roof & Insulation Foam Genius is a convenient and superb product that provides outstanding polyurethane expanding foam delivered in a reusable container. The Genius Gun cap allows multiple uses out of the same can without concerns of clogging, allowing endless use. The product's formula is unrivalled, providing excellent value and thermal and acoustic insulation that's entirely freon-free. It's elastic, compressible, fast curing and suitable for use onto most common surfaces except PE, PP and PTFE.
Preparation
Due to the nature of this product, its expanding properties and excellent adhesion allow it to fill voids effectively. However, brushing the area is a good practice, as it removes any organic growth, small debris, dust, or grease.
Application
- Shake the can thoroughly for at least 20 seconds
- Open the cover and fold the tube perpendicular to the can
- Slightly moisten the surfaces with a water spray
- Fill the 1/3 of the void, allowing the expanding foam to fill the rest
- Ensure as you continue applying, you continue to shake the can in intervals
- If you're applying in layers, allow the one prior to cure, slightly moisten the surface and apply another layer on top
Limitations and Notes
- Any cured expanding foam must be removed mechanically.
- Uncured expanding foam can be wiped away with a wet cloth.
- Slightly moistened surfaces enhance curing, adhesive, and yield.
