ALM Code 3 Milled Lead - 600mm x 3m 
Timloc Interlocking Plain Tile Vent Brown (Box of 12) 
Soudal Acetoxy Stay Fresh Sanitary Silicone Sealant – Ice White 290ml 
Klober Permo Ecovent - 1.1m x 50m 
Everbuild Mitre Fast Industrial Kit Superglue (Box of 24) 
Code 7 Cast Lead - 150mm x 3m 
Code 3 Cast Lead - 850mm x 6m 
Everbuild Black Jack 904 Roof Felt Adhesive – 2.5 Litre 
Bond It Mega Foam Gun/Aerosol PU Expanding Foam - Beige 750ml 
Lead Sheet Cleaner - 1 Litre 
Everbuild Patio Wizard – 1 Litre 
Everbuild No Waste Foam – 750ml 
Thompson's One Coat Damp Seal - White 750ml 
ALM Code 7 Milled Lead - 150mm x 3m 
Code 5 Cast Lead - 1000mm x 3m 
Soudal Trade Roof & Insulation Expanding Foam Genius - 600ml (Box of 12) 
ALM Code 8 Milled Lead - 914mm x 3m 
Bond It Bitumen Primer - Black 2.5L 
Soudal Soudafoam Hand Held One Shot - 150ml (Box of 12) 
Soudal solseal is a solvent free adhesive specially formulated for bonding mirrors and difficult materials such as metals, plasterboard, timber, fibreglass and to most other common surfaces and will even bond to damp surfaces
- Used for the Internal fixing of mirrors, coated glass and glass splashback's
- Important always apply in vertical lines to avoid the build up of moisture across the joint the moisture buildup would possibly damage the mirror backing over time.
- Before bonding the back coating of the mirror should be checked for damages eg scratches. Do not apply adhesive to a damaged mirror.
- Apply product with the enclosed triangular nozzle in vertical beads to the back of the mirror.
- Depending on the dimension and weight of the mirrors, beads should be placed at equal distances between 10 to 20cm from each other.
- Use a double sided mirror tape for an initial tack and to create the necessary ventilation behind the mirror.
- Do not seal the mirror edges until the mirror adhesive is fully bonded, mirror adhesive is moisture cured from the air.
