Bond It Heavy Duty Gun Foam Applicator 
FloPlast Half Round Downpipe Shoe, Black – 68mm 
Ronseal Ultra Tough Mattcoat Clear Varnish - 2.5L 
FloPlast Round Line Downpipe Clip, Brown 
OX Heavy Duty Soft Gel Filled Knee Pad 
Timloc Non-Profile Tile Vent Brown (Box of 8) 
Bond It Patination Oil 500ml 
ALM Code 4 Milled Lead - 180mm x 6m 
ALM Code 5 Milled Lead - 800mm x 3m 
FloPlast Half Round Downpipe Socket, Black 
Bond It Bath Mate Bath & Kitchen Sealant - White EU3 Box of 25 
Everbuild Opti-Mix Cement Colourant – Black 1 Litre 
SikaBond MS Wood Floor Gun Grade - Parquet Brown 600ml 
Everbuild Pinkgrip SF But It’s White – 380ml (Box of 12) 
Soudal solseal is a solvent free adhesive specially formulated for bonding mirrors and difficult materials such as metals, plasterboard, timber, fibreglass and to most other common surfaces and will even bond to damp surfaces
Used for the Internal fixing of mirrors, coated glass and glass splashback's
Important always apply in vertical lines to avoid the build up of moisture across the joint the moisture buildup would possibly damage the mirror backing over time.
Before bonding the back coating of the mirror should be checked for damages eg scratches. Do not apply adhesive to a damaged mirror.
Apply product with the enclosed triangular nozzle in vertical beads to the back of the mirror.
Depending on the dimension and weight of the mirrors, beads should be placed at equal distances between 10 to 20cm from each other.
Use a double sided mirror tape for an initial tack and to create the necessary ventilation behind the mirror.
Do not seal the mirror edges until the mirror adhesive is fully bonded, mirror adhesive is moisture cured from the air.
